Effect of Air Pressure on Parameters of Beam Current and X-Ray Radiation Generated in a Gas Diode


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

Parameters of a beam of runaway electrons and X-ray radiation generated in a gas diode at different atmospheric pressures are studied. It is shown that the maximum beam currents and intensities of X-ray radiation are generated at an air pressure of about 102 Pa. Distribution of beam electrons with respect to energy is determined by the method of  attenuation of beam current using aluminum filters with different thicknesses. The maximum of such a distribution corresponds to an electron energy of about 100 keV. The maximum exposure dose of X-ray radiation behind a copper-foil anode with a thickness of 30 μm is about 107 mR. It is shown that the beam electrons absorbed by elements of an X-ray detector affect the shape and amplitude of the desired signal at beam currents of greater than 35 A/cm2.

作者简介

M. Lomaev

High-Current Electronics Institute, Siberian Branch, Russian Academy of Sciences; Tomsk National Research State University

编辑信件的主要联系方式.
Email: Lomaev@loi.hcei.tsc.ru
俄罗斯联邦, Tomsk, 634055; Tomsk, 634050

V. Tarasenko

High-Current Electronics Institute, Siberian Branch, Russian Academy of Sciences; Tomsk National Research State University

Email: Lomaev@loi.hcei.tsc.ru
俄罗斯联邦, Tomsk, 634055; Tomsk, 634050

E. Baksht

High-Current Electronics Institute, Siberian Branch, Russian Academy of Sciences

Email: Lomaev@loi.hcei.tsc.ru
俄罗斯联邦, Tomsk, 634055

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2019