Effect of the Rate of the Rise in Current on Transient Processes in a Superconducting Fault Current Limiter


Цитировать

Полный текст

Открытый доступ Открытый доступ
Доступ закрыт Доступ предоставлен
Доступ закрыт Только для подписчиков

Аннотация

The effect of the rate of the rise in the current to 1700 A/ms on the characteristics of a transition of units of superconducting (HTSC) modules from a superconducting to normal state has been experimentally studied. The units differed by the critical current of the HTSC tape and design. The units of HTSC modules are used as a part of the resistive superconducting fault current limiter (SFCL) for ac and dc grids. The obtained dependences should be taken into account when designing a resistive SFCL.

Об авторах

D. Alferov

JSC Technical Physics and Automation Research Institute

Автор, ответственный за переписку.
Email: DFAlferov@niitfa.ru
Россия, Moscow, 115230

M. Akhmetgareev

JSC Technical Physics and Automation Research Institute

Email: DFAlferov@niitfa.ru
Россия, Moscow, 115230

D. Evsin

JSC Technical Physics and Automation Research Institute

Email: DFAlferov@niitfa.ru
Россия, Moscow, 115230

I. Voloshin

JSC Technical Physics and Automation Research Institute

Email: DFAlferov@niitfa.ru
Россия, Moscow, 115230

A. Kalinov

JSC Technical Physics and Automation Research Institute

Email: DFAlferov@niitfa.ru
Россия, Moscow, 115230

L. Fisher

JSC Technical Physics and Automation Research Institute

Email: DFAlferov@niitfa.ru
Россия, Moscow, 115230

E. Tskhai

JSC Technical Physics and Automation Research Institute

Email: DFAlferov@niitfa.ru
Россия, Moscow, 115230

Дополнительные файлы

Доп. файлы
Действие
1. JATS XML

© Pleiades Publishing, Ltd., 2018

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).