Effect of Load-Induced Oxygen Absorption in YBa2Cu3O6 + x on Mechanical Properties of the “Polyimide–YBa2Cu3O6 + x” System
- Autores: Muradov A.1, Kyrykbaeva A.1
-
Afiliações:
- Al Farabi Kazakh National University
- Edição: Volume 63, Nº 5 (2018)
- Páginas: 723-732
- Seção: Physical Science of Materials
- URL: https://journals.rcsi.science/1063-7842/article/view/201400
- DOI: https://doi.org/10.1134/S1063784218050183
- ID: 201400
Citar
Resumo
We have studied the effect of oxygen absorption by disperse powder fillers made of high-temperature superconductor YBa2Cu3O6 + x (YBCO) with concentrations of 0.05, 0.1, and 0.5 mass % on mechanical properties of polyimide composite materials (PCMs) in the form of films. It has been established that an adsorption boundary layer consisting of an aggregate of several transition layers with a varying structure is formed between filler particles and the matrix. A sharp increase in relative elongation (strain) Δεc, which is observed for a PCM with YBCO fillers in the form of a jump in the region of loads of 40–47 MPa, is due to the fact that the bonds between the matrix macromolecules and the molecules in the vicinity of the upper boundary layer are ruptured, leading to a strain jump. An increase in the filler concentration increases the rigidity of the bonds between macromolecules in the boundary layers, leads to a shift of Δεc to the region of low stresses, and reduces its value.
Sobre autores
A. Muradov
Al Farabi Kazakh National University
Autor responsável pela correspondência
Email: abyl.muradov@mail.ru
Cazaquistão, Almaty, 050040
A. Kyrykbaeva
Al Farabi Kazakh National University
Email: abyl.muradov@mail.ru
Cazaquistão, Almaty, 050040