Dynamic Strength of a Titanium Alloy with an Electron-Beam-Modified Surface
- Autores: Savenkov G.1,2, Kuznetsov A.1, Bragov A.3
-
Afiliações:
- Armalit Machine-Building Plant
- St. Petersburg State Institute of Technology (Technical University)
- Research Institute of Mechanics
- Edição: Volume 63, Nº 5 (2018)
- Páginas: 718-722
- Seção: Physical Science of Materials
- URL: https://journals.rcsi.science/1063-7842/article/view/201393
- DOI: https://doi.org/10.1134/S1063784218050201
- ID: 201393
Citar
Resumo
Data are presented of plane-wave experiments aimed at determining the dynamic strength of 3M titanium alloy with a surface processed by a microsecond electron beam. It has been found that the dynamic strength of processed specimens is higher than that of unprocessed specimens. Metallographic examination of test specimens has revealed spallation macrofracture inside the unprocessed specimens and spallation microfracture at the interface between the hardened layer and the substrate in the beam-processed specimens.
Sobre autores
G. Savenkov
Armalit Machine-Building Plant; St. Petersburg State Institute of Technology (Technical University)
Autor responsável pela correspondência
Email: sav-georgij@yandex.ru
Rússia, St. Petersburg, 198097; St. Petersburg, 190013
A. Kuznetsov
Armalit Machine-Building Plant
Email: sav-georgij@yandex.ru
Rússia, St. Petersburg, 198097
A. Bragov
Research Institute of Mechanics
Email: sav-georgij@yandex.ru
Rússia, Nizhny Novgorod, 603950