Study of the Compression of a Condensed Deuterated Target Installed on the Wire Array Axis

V. V. Aleksandrov; G. S. Volkov; E. V. Grabovski; A. N. Gritsuk; I. V. Volobuev; Yu. G. Kalinin; V. D. Korolev; Ya. N. Laukhin; S. F. Medovshchikov; K. N. Mitrofanov; G. M. Oleinik; V. G. Pimenov; E. A. Smirnova; I. N. Frolov

doi:10.1134/S1063780X19090022

Study of the Compression of a Condensed Deuterated Target Installed on the Wire Array Axis

Autores: Aleksandrov V.V.¹, Volkov G.S.¹, Grabovski E.V.¹, Gritsuk A.N.¹, Volobuev I.V.², Kalinin Y.G.³, Korolev V.D.³, Laukhin Y.N.¹, Medovshchikov S.F.¹, Mitrofanov K.N.¹, Oleinik G.M.¹, Pimenov V.G.⁴, Smirnova E.A.³, Frolov I.N.¹
Afiliações:
1. Troitsk Institute for Innovation and Fusion Research
2. Lebedev Physical Institute, Russian Academy of Sciences
3. National Research Center “Kurchatov Institute”
4. Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences
Edição: Volume 45, Nº 9 (2019)
Páginas: 805-820
Seção: Plasma Dynamics
URL: https://journals.rcsi.science/1063-780X/article/view/187030
DOI: https://doi.org/10.1134/S1063780X19090022
ID: 187030

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

The implosion of combined loads consisting of an outer wire (fiber) array and inner cylindrical target was studied experimentally at the Angara-5-1 facility (3.5 MA, 100 ns) at currents of up to 3.5 MA. The experiments were carried out with 12- and 20-mm-diameter outer arrays made of 15-μm-diameter aluminum wires, composite arrays made of aluminum wires and 25-μm-diameter kapron fibers, and arrays made of kapron fibers with a 1-μm-thick aluminum coating. The number of wires varied from 10 to 40. The targets were made of agar-agar or low-density deuterated polyethylene. The parameters of the Z-pinch plasma were determined using the Angara-5-1 diagnostic complex, which included optical streak cameras, X-ray frame cameras, X-ray detectors, X-ray pinhole cameras, neutron detectors, and a mica-crystal X-ray spectrograph. It is established that the plasma compression dynamics and the formation of local plasma structures generating neutrons depend on the load configuration: the array diameter, the number of wires (fibers), and the diameter and density of the target. The most efficient compression and the highest plasma parameters (the compression ratio and plasma temperature), as well as the highest neutron yield, were achieved in experiments with 12-mm-diameter aluminum wire arrays inside which a 1-mm-diameter deuterated target with a mass density of 0.3 g/cm³ was installed As a result of collision of the bulk of the array mass with the inner target, a compact pinch with a diameter of ≈0.5 mm forms. The pinch formation is accompanied by the generation of a soft X-ray pulse. The development of MHD instabilities in the pinch plasma results in the formation of multiple hot spots (HSs) on the pinch axis with a typical size of 200–300 μm and an electron temperature of 0.4–0.7 keV. The HS formation is accompanied by emission of neutrons with a mean energy of 2.7 ± 0.2 MeV. The maximum neutron yield achieved in these experiments was 2.6 × 10¹⁰ neutrons/shot.

Arquivos suplementares

Ação

1. JATS XML

Baixar

Nome de usuário
Senha
Lembrar usuário

Esqueceu a senha?	Cadastro

Nome de usuário
Senha
Lembrar usuário

Esqueceu a senha?	Cadastro

Study of the Compression of a Condensed Deuterated Target Installed on the Wire Array Axis

Texto integral

Resumo

Sobre autores

V. Aleksandrov

G. Volkov

E. Grabovski

A. Gritsuk

I. Volobuev

Yu. Kalinin

V. Korolev

Ya. Laukhin

S. Medovshchikov

K. Mitrofanov

G. Oleinik

V. Pimenov

E. Smirnova

I. Frolov

Arquivos suplementares