The Nature of Anomalous Particles (Granules) in Rapidly Quenched PREP Powders: I. A Multiscale Study of the Heating Zone of the Rotating Electrode Used to Obtain the Rapidly Quenched PREP Ni-Based Superalloy Powder

Аннотация

The uniformity of composition of rapidly quenched PREP particles of the powder of high temperature Ni-based superalloys and stainless steels is characterized by an important feature—the occurrence of anomalous particles (granules) with a significantly different content, mainly of microalloying interstitial elements, carbon and boron, as well as active carbide- and boride-forming alloying elements. A detailed multi-scale experimental study of the heating zone of the crater of the Ni-based superalloy electrode after its use to obtain rapidly quenched PREP powder was carried out in order to find the nature and mechanisms of the formation of anomalous granules. Direct nuclear physics methods of activation autoradiography on carbon, track autoradiography on boron, metallography, SEM, EDX, OIM were used. In the electrode crater, the heat-affected zone (HAZ) and the partially melted zone (PMZ) were detected. Intense migration of boron to the electrode surface due to the formation of thermal macrocracks was also revealed. The behavior of carbon is determined by the formation of a thin layer of melt on the surface of the crater. The features of the evolution of the terminal solidification region TSR and incipiently melted regions IMR, the main type of heterogeneity of the composition of the dendritic structure of Ni-based superalloys and stainless steels, are revealed. The interrelation of the evolution of these areas is established, which is a consequence of the thermodynamic principle of the reversibility of the processes of solidification and melting, respectively, in the smelting of an ingot electrode and in the process of subsequent atomization. The analysis of the influence of the behavior of boron, carbon, and the characteristics of the crater structure on the nature and mechanism of the formation of anomalous granules using the PREP method for producing rapidly quenched powder of the Ni-based superalloy is performed.