Enviar artigo por via de e-mail Formation of “Fuzz” on the Pre-Nitrided Tungsten Surface
- Autores: Tulenbergenov T.R.1, Skakov M.K.1, Sokolov I.A.1, Ganovichev D.A.1, Miniyazov A.Z.1
-
Afiliações:
- Institute of Atomic Energy Branch
- Edição: Volume 82, Nº 11 (2019)
- Páginas: 1454-1459
- Seção: Materials and Technologies for New Power Sources
- URL: https://journals.rcsi.science/1063-7788/article/view/195846
- DOI: https://doi.org/10.1134/S1063778819120299
- ID: 195846
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Experiments are carried out on a simulation stand with a plasma-beam facility in order to study the formation of “fuzz” on the initial and pre-nitrided tungsten surface. The parameters of the experiments of the nitriding and formation of the tungsten “fuzz” are given. The results of materials science study are shown. The characteristics of the tungsten “fuzz” on the nitrided and non-nitrided tungsten surfaces are determined and the results obtained are analyzed.
Palavras-chave
Sobre autores
T. Tulenbergenov
Institute of Atomic Energy Branch
Autor responsável pela correspondência
Email: Tulenbergenov@nnc.kz
Cazaquistão, Kurchatov
M. Skakov
Institute of Atomic Energy Branch
Email: Tulenbergenov@nnc.kz
Cazaquistão, Kurchatov
I. Sokolov
Institute of Atomic Energy Branch
Email: Tulenbergenov@nnc.kz
Cazaquistão, Kurchatov
D. Ganovichev
Institute of Atomic Energy Branch
Email: Tulenbergenov@nnc.kz
Cazaquistão, Kurchatov
A. Miniyazov
Institute of Atomic Energy Branch
Email: Tulenbergenov@nnc.kz
Cazaquistão, Kurchatov
Arquivos suplementares
