Design Features of the Neutral Particle Diagnostic System for the ITER Tokamak

S. Ya. Petrov; S. S. Kozlovski; B. V. Lyublin; E. G. Kuzmin; I. V. Kedrov; F. V. Chernyshev; M. P. Petrov; V. G. Nesenevich; A. S. Navolotsky; M. I. Mironov; A. D. Melnik; V. I. Afanasyev; A. N. Mokeev

doi:10.1134/S1063778817070109

Design Features of the Neutral Particle Diagnostic System for the ITER Tokamak

Autores: Petrov S.Y.¹, Kozlovski S.S.², Lyublin B.V.³, Kuzmin E.G.³, Kedrov I.V.³, Chernyshev F.V.¹, Petrov M.P.¹, Nesenevich V.G.¹, Navolotsky A.S.¹, Mironov M.I.¹, Melnik A.D.¹, Afanasyev V.I.¹, Mokeev A.N.⁴
Afiliações:
1. Ioffe Institute
2. Peter the Great St. Petersburg Polytechnic University
3. Efremov Research Institute of Electrophysical Apparatus
4. Institution Project Center ITER
Edição: Volume 80, Nº 7 (2017)
Páginas: 1268-1278
Seção: Article
URL: https://journals.rcsi.science/1063-7788/article/view/192956
DOI: https://doi.org/10.1134/S1063778817070109
ID: 192956

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

The control of the deuterium–tritium (DT) fuel isotopic ratio has to ensure the best performance of the ITER thermonuclear fusion reactor. The diagnostic system described in this paper allows the measurement of this ratio analyzing the hydrogen isotope fluxes (performing neutral particle analysis (NPA)). The development and supply of the NPA diagnostics for ITER was delegated to the Russian Federation. The diagnostics is being developed at the Ioffe Institute. The system consists of two analyzers, viz., LENPA (Low Energy Neutral Particle Analyzer) with 10–200 keV energy range and HENPA (High Energy Neutral Particle Analyzer) with 0.1–4.0MeV energy range. Simultaneous operation of both analyzers in different energy ranges enables researchers to measure the DT fuel ratio both in the central burning plasma (thermonuclear burn zone) and at the edge as well. When developing the diagnostic complex, it was necessary to account for the impact of several factors: high levels of neutron and gamma radiation, the direct vacuum connection to the ITER vessel, implying high tritium containment, strict requirements on reliability of all units and mechanisms, and the limited space available for accommodation of the diagnostic hardware at the ITER tokamak. The paper describes the design of the diagnostic complex and the engineering solutions that make it possible to conduct measurements under tokamak reactor conditions. The proposed engineering solutions provide a safe—with respect to thermal and mechanical loads—common vacuum channel for hydrogen isotope atoms to pass to the analyzers; ensure efficient shielding of the analyzers from the ITER stray magnetic field (up to 1 kG); provide the remote control of the NPA diagnostic complex, in particular, connection/disconnection of the NPA vacuum beamline from the ITER vessel; meet the ITER radiation safety requirements; and ensure measurements of the fuel isotopic ratio under high levels of neutron and gamma radiation.

Palavras-chave

ITER, fuel isotopic ratio, plasma diagnostics, neutral particle analyzer

Arquivos suplementares

Ação

1. JATS XML

Baixar

Nome de usuário
Senha
Lembrar usuário

Esqueceu a senha?	Cadastro

Nome de usuário
Senha
Lembrar usuário

Esqueceu a senha?	Cadastro

Design Features of the Neutral Particle Diagnostic System for the ITER Tokamak

Texto integral

Resumo

Palavras-chave

Sobre autores

S. Petrov

S. Kozlovski

B. Lyublin

E. Kuzmin

I. Kedrov

F. Chernyshev

M. Petrov

V. Nesenevich

A. Navolotsky

M. Mironov

A. Melnik

V. Afanasyev

A. Mokeev

Arquivos suplementares