Отправить статью по E-mail High-speed machining of martensitic stainless steel using PcBN
- Авторы: Sigalas I.1, Sobiyi K.1
-
Учреждения:
- School of Chemical and Metallurgical Engineering University of the Witwatersrand
- Выпуск: Том 38, № 1 (2016)
- Страницы: 34-39
- Раздел: Production, Structure, Properties
- URL: https://journals.rcsi.science/1063-4576/article/view/185489
- DOI: https://doi.org/10.3103/S1063457616010056
- ID: 185489
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
The performance of PcBN cutting tool during its application in the mass production of components made from AISI 440B stainless steel has been considered. The experimental tests have been performed at cutting speed ranging between 350–500 m/min at dry cutting conditions. The machining operations that have been explored included facing, turning, grooving and boring and the 3D topography of the machined surface are presented. The results show that good surface finish similar to grinding and dimensional accuracy can be achieved with PcBN tools.
Ключевые слова
Об авторах
I. Sigalas
School of Chemical and Metallurgical Engineering University of the Witwatersrand
Email: kk_sob@yahoo.com
ЮАР, Wits, Johannesburg, 2050
K. Sobiyi
School of Chemical and Metallurgical Engineering University of the Witwatersrand
Автор, ответственный за переписку.
Email: kk_sob@yahoo.com
ЮАР, Wits, Johannesburg, 2050
Дополнительные файлы
