Studying the mechanisms of steel sheet perforation by the radiation of a continuous-wave fiber laser

G. G. Gladush; A. F. Glova; V. I. Golovichev; S. V. Gvozdev; A. G. Krasyukov; A. Yu. Lysikov; V. K. Rerikh; M. D. Taran

doi:10.3103/S1062873816040134

Studying the mechanisms of steel sheet perforation by the radiation of a continuous-wave fiber laser

Авторы: Gladush G.G.¹^,2, Glova A.F.²^,3, Golovichev V.I.⁴, Gvozdev S.V.², Krasyukov A.G.², Lysikov A.Y.², Rerikh V.K.², Taran M.D.²
Учреждения:
1. Institute of Laser and Information Technologies
2. Troitsk Institute for Innovation and Fusion Research
3. National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
4. Chalmers University of Technology
Выпуск: Том 80, № 4 (2016)
Страницы: 393-396
Раздел: Proceedings of the XI Conference “Lasers and Laser Information Technologies: Fundamental Problems and Applications”
URL: https://journals.rcsi.science/1062-8738/article/view/184209
DOI: https://doi.org/10.3103/S1062873816040134
ID: 184209

Цитировать

Полный текст

Открытый доступ
Доступ закрыт

Доступ предоставлен
Доступ закрыт

Только для подписчиков

Аннотация
Об авторах
Список литературы
Дополнительные файлы
Статистика

Аннотация

Aspects of steel sheet perforation are studied experimentally. Calculations show that the mechanisms of thin sheet perforation change as the focal spot size is increased at a constant laser power. If the spot is small, the melt is removed and the film is disrupted by steel boiling in the spot center. With larger spots, the melt is removed by the force of gravity. The hole diameter grows along with the focal spot size and sheet thickness and is reduced upon an increase in laser power.