Enviar artigo por via de e-mail Phase Transformations in an Fe-Based Bulk Amorphous Alloy inside a Ball Mill
- Autores: Diakonova N.P.1, Zakharova E.A.1, Sviridova T.A.1, Chueva T.R.2
-
Afiliações:
- National University of Science and Technology (MISiS)
- Baikov Institute of Metallurgy and Materials Science, Russian Academy
- Edição: Volume 83, Nº 10 (2019)
- Páginas: 1231-1234
- Seção: Article
- URL: https://journals.rcsi.science/1062-8738/article/view/187551
- DOI: https://doi.org/10.3103/S106287381910006X
- ID: 187551
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The possibility of using a ball mill to obtain an amorphous state in bulk amorphous Fe61.4Ni3.6Cr3.2Si2.4Nb7.8Mn3.6B18 alloy is studied. The presence of a metastable phase in the initial reagents allows the rate of amorphization to be notably accelerated with an almost full transformation to the amorphous state. Compared to a quench-hardened tape, however, the content of the amorphous state obtained via mechanical milling is distinguished by a reduced content of boron and therefore a lower temperature of crystallization.
Sobre autores
N. Diakonova
National University of Science and Technology (MISiS)
Autor responsável pela correspondência
Email: Nemezia27@gmail.com
Rússia, Moscow, 119991
E. Zakharova
National University of Science and Technology (MISiS)
Email: Nemezia27@gmail.com
Rússia, Moscow, 119991
T. Sviridova
National University of Science and Technology (MISiS)
Email: Nemezia27@gmail.com
Rússia, Moscow, 119991
T. Chueva
Baikov Institute of Metallurgy and Materials Science, Russian Academy
Email: Nemezia27@gmail.com
Rússia, Moscow, 119334
Arquivos suplementares
