Enviar artigo por via de e-mail Mesoporous Silica by Solution-Combustion Synthesis Followed by Etching
- Autores: Salehtash F.1, Jalaly M.1, Motejadded Emrooz H.B.1, Gotor F.J.2, Sayagués M.J.2
-
Afiliações:
- Nanotechnology Department, School of New Technologies
- Instituto de Ciencia de Materiales de Sevilla (CSIC-US)
- Edição: Volume 27, Nº 4 (2018)
- Páginas: 221-227
- Seção: Article
- URL: https://journals.rcsi.science/1061-3862/article/view/196005
- DOI: https://doi.org/10.3103/S1061386218040064
- ID: 196005
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Mesoporous silica was synthesized through the solution-combustion process followed by etching with aqueous solution of sodium dodecyl sulfate (SDS). Combustion products were characterized by XRD, FTIR, SEM, TEM, HRTEM, and BET analysis. After etching, the specific surface, mean pore size, and volume of porous space in silica increased up to 390 m2/g, 15 nm, and 1.6 cm3/g, respectively. The synthesized mesoporous silica exhibited good performance in the tests on elimination of methylene blue from aqueous solution.
Palavras-chave
Sobre autores
F. Salehtash
Nanotechnology Department, School of New Technologies
Email: maisam_jalaly@iust.ac.ir
Irã, Narmak, Tehran
M. Jalaly
Nanotechnology Department, School of New Technologies
Autor responsável pela correspondência
Email: maisam_jalaly@iust.ac.ir
Irã, Narmak, Tehran
H. Motejadded Emrooz
Nanotechnology Department, School of New Technologies
Email: maisam_jalaly@iust.ac.ir
Irã, Narmak, Tehran
F. Gotor
Instituto de Ciencia de Materiales de Sevilla (CSIC-US)
Email: maisam_jalaly@iust.ac.ir
Espanha, Sevilla
M. Sayagués
Instituto de Ciencia de Materiales de Sevilla (CSIC-US)
Email: maisam_jalaly@iust.ac.ir
Espanha, Sevilla
Arquivos suplementares
