NiAl-based electrodes by combined use of centrifugal SHS and induction remelting

Yu. S. Pogozhev; V. N. Sanin; D. M. Ikornikov; D. E. Andreev; V. I. Yukhvid; E. A. Levashov; Zh. A. Sentyurina; A. I. Logacheva; A. N. Timofeev

doi:10.3103/S1061386216030092

NiAl-based electrodes by combined use of centrifugal SHS and induction remelting

Autores: Pogozhev Y.S.¹, Sanin V.N.², Ikornikov D.M.², Andreev D.E.², Yukhvid V.I.², Levashov E.A.¹, Sentyurina Z.A.¹, Logacheva A.I.³, Timofeev A.N.³
Afiliações:
1. National University of Science and Technology MISiS
2. Institute of Structural Macrokinetics and Materials Science
3. Research and Production Corporation KOMPOZIT
Edição: Volume 25, Nº 3 (2016)
Páginas: 186-199
Seção: Article
URL: https://journals.rcsi.science/1061-3862/article/view/195728
DOI: https://doi.org/10.3103/S1061386216030092
ID: 195728

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

NiAl-based electrodes of a required size were fabricated by combined use of centrifugal SHS casting and induction remelting in an inert atmosphere and characterized by modern analytical methods. Thus produced electrode materials exhibiting high chemical purity and low content of impurity gases (0.005 wt % O, 0.0001 wt % N) can be recommended for use in centrifugal plasma sputtering of micro granules via the plasma rotating electrode process (PREP).