Increasing the Strength of Commercial Titanium VT1–0 Using the Method of Severe Plastic Deformation
- 作者: Latysh V.1, Burlakov I.2, Zabel’yan D.2, Alimov A.3, Petrov P.4, Stepanov B.4, Chong B.4
-
隶属关系:
- Scientific and Production Association Technopark of Aviation Technologies
- AO Salyut Scientific and Production Center of Gas Turbine Construction
- Bauman Moscow State Technical University
- Moscow Polytechnic University
- 期: 卷 47, 编号 6 (2018)
- 页面: 525-531
- 栏目: Reliability, Strength, and Wear Resistance of Machines and Structures
- URL: https://journals.rcsi.science/1052-6188/article/view/194065
- DOI: https://doi.org/10.3103/S1052618818060079
- ID: 194065
如何引用文章
详细
The problem of reduction of the mass of parts due to an increase in the strength characteristics of the material of these parts by forming an ultrafine grain structure using the method of combined severe deformation including multiaxial forging with further upsetting with torsion is solved. The results of mechanical tensile tests and metallographic tests of titanium are presented, as are the thermal processing modes increasing the plasticity while keeping sufficiently high strength characteristics, which allow selecting the thermomechanical processing parameters required for a certain article.
作者简介
V. Latysh
Scientific and Production Association Technopark of Aviation Technologies
Email: burlakov@salut.ru
俄罗斯联邦, Ufa
I. Burlakov
AO Salyut Scientific and Production Center of Gas Turbine Construction
编辑信件的主要联系方式.
Email: burlakov@salut.ru
俄罗斯联邦, Moscow
D. Zabel’yan
AO Salyut Scientific and Production Center of Gas Turbine Construction
Email: burlakov@salut.ru
俄罗斯联邦, Moscow
A. Alimov
Bauman Moscow State Technical University
Email: burlakov@salut.ru
俄罗斯联邦, Moscow
P. Petrov
Moscow Polytechnic University
Email: burlakov@salut.ru
俄罗斯联邦, Moscow
B. Stepanov
Moscow Polytechnic University
Email: burlakov@salut.ru
俄罗斯联邦, Moscow
Bach Chong
Moscow Polytechnic University
Email: burlakov@salut.ru
俄罗斯联邦, Moscow