Enviar artigo por via de e-mail Procedure for designing an unloading device for the thrust bearing of the rotor of a turbomachine
- Autores: Faleev S.V.1, Vinogradov A.S.1
-
Afiliações:
- Samara State Aerospace University (National Research Institute)
- Edição: Volume 46, Nº 5 (2017)
- Páginas: 494-500
- Seção: Reliability, Strength, and Wear Resistance of Machines and Structures
- URL: https://journals.rcsi.science/1052-6188/article/view/193586
- DOI: https://doi.org/10.3103/S1052618817040070
- ID: 193586
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The structure of an unloading device for the thrust bearing of the rotor of a turbomachine has been presented in the paper. Its structure and operating principle have also been described. The end gas dynamic seal with spiral groove is examined as a main element of the designed element. A mathematical model of such seal is presented in the paper. The results of calculations and experimental investigations of the designed unloading device have been presented.
Sobre autores
S. Faleev
Samara State Aerospace University (National Research Institute)
Email: a.s.vinogradov@list.ru
Rússia, Samara
A. Vinogradov
Samara State Aerospace University (National Research Institute)
Autor responsável pela correspondência
Email: a.s.vinogradov@list.ru
Rússia, Samara
Arquivos suplementares
