Active Layer Thickness Effect on the Behavior of Electrodes Based on Lithium Iron Phosphate


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The effect of the active layer thickness (the amount of active material per unit area of the electrode) on the behavior of electrodes based on lithium iron phosphate was first studied by methods of galvanostatic cycling and cyclic voltammetry. When considering the electrode as a system with doubly distributed parameters (distribution of material composition along the individual LiFePO4 grain radius and distribution of the process along the depth of the active layer), it was concluded that the distribution of the process over the depth of the active layer is much more pronounced than in the bulk of individual grains of lithium iron phosphate. It is assumed that such conclusion will be valid for electrodes from other materials.

作者简介

E. Tusseeva

Frumkin Institute of Physical Chemistry and Electrochemistry

Email: askundin@mail.ru
俄罗斯联邦, Moscow, 119071

T. Kulova

Frumkin Institute of Physical Chemistry and Electrochemistry

Email: askundin@mail.ru
俄罗斯联邦, Moscow, 119071

A. Skundin

Frumkin Institute of Physical Chemistry and Electrochemistry

编辑信件的主要联系方式.
Email: askundin@mail.ru
俄罗斯联邦, Moscow, 119071

A. Galeeva

Center of Physical Chemical Methods of Research and Analysis

Email: askundin@mail.ru
哈萨克斯坦, Almaty

A. Kurbatov

Al-Farabi Kazakh National University

Email: askundin@mail.ru
哈萨克斯坦, Almaty

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2019