Anode with the Active Layer for Electrosynthesizing Ozone in a System with Solid Polymer Electrolyte
- Autores: Akel’kina S.1, Pushkarev A.1,2, Grigoriev S.2, Pushkareva I.1,2, Fateev V.1
-
Afiliações:
- National Research Center “Kurchatov Institute,”
- National Research University “Moscow Power Engineering Institute,”
- Edição: Volume 54, Nº 3 (2018)
- Páginas: 251-257
- Seção: Article
- URL: https://journals.rcsi.science/1023-1935/article/view/189282
- DOI: https://doi.org/10.1134/S1023193518030023
- ID: 189282
Citar
Resumo
The synthesis of catalytic coatings on porous titanium electrodes by the method of magnetron sputtering is considered. The content of dopant ions Fe3+ and F– is optimized as regards the activity and stability of the PbO2 catalyst in the reaction of ozone electrogeneration as well as the current efficiency with respect to ozone. It is shown that the best characteristics of the electrochemical ozone generator are observed on the PbO2 catalyst doped with Fe3+ and F– ions in the amount of 3–4 and 1–2 at %, respectively.
Palavras-chave
Sobre autores
S. Akel’kina
National Research Center “Kurchatov Institute,”
Email: sergey.grigoriev@outlook.com
Rússia, Moscow, 123182
A. Pushkarev
National Research Center “Kurchatov Institute,”; National Research University “Moscow Power Engineering Institute,”
Email: sergey.grigoriev@outlook.com
Rússia, Moscow, 123182; Moscow, 111250
S. Grigoriev
National Research University “Moscow Power Engineering Institute,”
Autor responsável pela correspondência
Email: sergey.grigoriev@outlook.com
Rússia, Moscow, 111250
I. Pushkareva
National Research Center “Kurchatov Institute,”; National Research University “Moscow Power Engineering Institute,”
Email: sergey.grigoriev@outlook.com
Rússia, Moscow, 123182; Moscow, 111250
V. Fateev
National Research Center “Kurchatov Institute,”
Email: sergey.grigoriev@outlook.com
Rússia, Moscow, 123182