Dye-Sensitized Solar Cell Utilizing TiO2 Nanostructure Films: Effect of Synthesis Temperature


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

This paper is concerned with a study of the influence of synthesis temperature on the properties of TiO2 films and the performance of dye-sensitized solar cell (DSSC). The TiO2 film samples synthesized via liquid phase deposition for 5 h at various temperatures, namely, 40, 50, 60, 70 and 80°C. It was found that the morphological shape of the film changes with growth temperature. The optical absorption increases with growth temperature. However, the photoluminescence decreases with growth temperature. These TiO2 samples were applied in a DSSC of ITO/TiO2/electrolyte/platinum. The DSSC utilizing the sample grown at 40°C demonstrated the highest photovoltaic parameters with the Jsc, and η of 1.40 mA cm–2 and 0.44% respectively. This is due to the smallest grain size of TiO2 films and the smallest bulk resistance of the device.

Sobre autores

A. Sulaiman

Institute of Microengineering and Nanoelectronics (IMEN)

Email: mohd.yusri@ukm.edu.my
Malásia, Selangor, Bangi, 43600

M. Rahman

Institute of Microengineering and Nanoelectronics (IMEN)

Autor responsável pela correspondência
Email: mohd.yusri@ukm.edu.my
Malásia, Selangor, Bangi, 43600

A. Umar

Institute of Microengineering and Nanoelectronics (IMEN)

Email: mohd.yusri@ukm.edu.my
Malásia, Selangor, Bangi, 43600

M. Salleh

Institute of Microengineering and Nanoelectronics (IMEN)

Email: mohd.yusri@ukm.edu.my
Malásia, Selangor, Bangi, 43600


Declaração de direitos autorais © Pleiades Publishing, Ltd., 2018

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies