Investigation of the mold powder film structure and its influence on the developed surface in continuous casting
- 作者: Anisimov K.1,2, Longinov A.1,2, Toptygin A.1,2, Gusev M.3, Zarubin S.3
-
隶属关系:
- Bardin Central Research Institute of Ferrous Metallurgy
- OOO Korad
- Bauman Moscow State Technical University
- 期: 卷 46, 编号 7 (2016)
- 页面: 489-495
- 栏目: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/178847
- DOI: https://doi.org/10.3103/S0967091216070032
- ID: 178847
如何引用文章
详细
In the continuous casting of steel, samples of the of the mold flux films are taken from the mold. The mineralogical composition of the crystalline, intercrystalline, and amorphous phases is determined. The influence of the morphology of the cuspidine crystals on the surface macrogeometry of the film is established. The frictional coefficient between a copper counterbody and the mold flux film surface is determined. The wear of the counterbody is greater on interaction with the crystalline surface.
作者简介
K. Anisimov
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
编辑信件的主要联系方式.
Email: akn@corad.ru
俄罗斯联邦, Moscow; Moscow
A. Longinov
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
Email: akn@corad.ru
俄罗斯联邦, Moscow; Moscow
A. Toptygin
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
Email: akn@corad.ru
俄罗斯联邦, Moscow; Moscow
M. Gusev
Bauman Moscow State Technical University
Email: akn@corad.ru
俄罗斯联邦, Moscow
S. Zarubin
Bauman Moscow State Technical University
Email: akn@corad.ru
俄罗斯联邦, Moscow