Influence of the Structural Parameters of High-Carbon Steel on the Impact Strength
- Авторы: Parusov E.1, Gubenko S.2, Sychkov A.3, Chuiko I.1, Sagura L.1, Denisenko A.2
-
Учреждения:
- Institute of Ferrous Metallurgy, Ukrainian Academy of Sciences
- Ukrainian Academy of Metallurgical Science
- Nosov Magnitogorsk State Technical University
- Выпуск: Том 48, № 12 (2018)
- Страницы: 812-817
- Раздел: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180360
- DOI: https://doi.org/10.3103/S0967091218120100
- ID: 180360
Цитировать
Аннотация
For a coil of rolled C86D steel subjected to accelerated continuous cooling from the hot-deformation temperatures, change in austenite grain size by scores no greater than 1–2 according to State Standard GOST 5639–82 has no significant influence on the impact strength. For C86D steel, the impact strength is directly related to the extent of the ferrite–cementite phase boundaries: the impact strength increases with increase in the boundary length. These results are of practical interest in developing new alloys and conditions of deformation and heat treatment for high-strength pearlitic steels.
Об авторах
E. Parusov
Institute of Ferrous Metallurgy, Ukrainian Academy of Sciences
Email: absychkov@mail.ru
Украина, Dnepr
S. Gubenko
Ukrainian Academy of Metallurgical Science
Email: absychkov@mail.ru
Украина, Dnepr
A. Sychkov
Nosov Magnitogorsk State Technical University
Автор, ответственный за переписку.
Email: absychkov@mail.ru
Россия, Magnitogorsk
I. Chuiko
Institute of Ferrous Metallurgy, Ukrainian Academy of Sciences
Email: absychkov@mail.ru
Украина, Dnepr
L. Sagura
Institute of Ferrous Metallurgy, Ukrainian Academy of Sciences
Email: absychkov@mail.ru
Украина, Dnepr
A. Denisenko
Ukrainian Academy of Metallurgical Science
Email: absychkov@mail.ru
Украина, Dnepr