| Edição |
Título |
Arquivo |
| Volume 47, Nº 11 (2017) |
Creating Weldable High-Strength Structural Steel with Nanostructuring |
|
|
Oryshchenko A.
|
| Volume 49, Nº 3 (2019) |
Creation of a Wear-Resistant Tungsten-Carbide Surface Layer on Carbon Steels by Implantation and Electromechanical Machining |
|
|
Gorlenko A., Davydov S., Shevtsov M., Boldyrev D.
|
| Volume 49, Nº 4 (2019) |
Creep Resistance of Ferrite–Martensite Steel for Nuclear Reactors |
|
|
Belomyttsev M., Molyarov V.
|
| Volume 48, Nº 1 (2018) |
Cybernetic Applications of New Precision Alloys |
|
|
Molotilov B., Eremin G.
|
| Volume 47, Nº 11 (2017) |
Cyclic Flexural Deformation of Thick Steel Sheet |
|
|
Maksimov A., Erokhina I.
|
| Volume 48, Nº 8 (2018) |
Cyclic Tests of Stress-corrosion Cracks in Steel Gas Pipelines with No Corrosive Fluid |
|
|
Afanas’ev A., Mel’nikov A., Vas’kov M., Bel’kov D.
|
| Volume 47, Nº 4 (2017) |
Cyclic-deformation system for the reduction of continuous-cast slabs |
|
|
Lekhov O., Mikhalev A., Bilalov D., Shevelev M.
|
| Volume 46, Nº 3 (2016) |
Damage to thick steel sheet in cyclic plastic flexure |
|
|
Maksimov A., Gulyaev M., Erokhina I.
|
| Volume 46, Nº 10 (2016) |
Damping of vibrations in the primary drives of cold-rolling mills |
|
|
Kozhevnikova I., Kozhevnikov A., Sorokin G., Markushevskii N.
|
| Volume 48, Nº 5 (2018) |
Decarburization and the Influence of Laser Cutting on Steel Structure |
|
|
Sergeev N., Minaev I., Gvozdev A., Cheglov A., Tikhonova I., Gubanov O., Tsyganov I., Alyavdina E., Breki A.
|
| Volume 46, Nº 9 (2016) |
Decarburization of high-chromium melts by argon–oxygen plasma |
|
|
Rumyantsev B., Komolova O., Grigorovich K., Garber A., Tabakov Y.
|
| Volume 49, Nº 3 (2019) |
Decision-Making Support in Blast-Furnace Operation |
|
|
Pavlov A., Polinov A., Spirin N., Onorin O., Lavrov V., Gurin I.
|
| Volume 46, Nº 3 (2016) |
Decomposition kinetics of supercooled austenite in porous powder steel |
|
|
Ivashko A., Tsyganova M., Nabatov R.
|
| Volume 49, Nº 3 (2019) |
Decomposition of Supercooled Austenite in Low-Carbon Pipe Steel |
|
|
Poletskov P., Denisov S., Nikitenko O., Chukin D., Gushchina M.
|
| Volume 49, Nº 4 (2019) |
Decreasing the Heat Losses at the Air Tuyeres in Blast Furnaces |
|
|
Radyuk A., Titlyanov A., Tarasov Y., Sidorova T.
|
| Volume 46, Nº 5 (2016) |
Defect healing in the axial zone of continuous-cast billet |
|
|
Smyrnov Y., Skliar V., Belevitin V., Shmyglya R., Smyrnov O.
|
| Volume 46, Nº 8 (2016) |
Degradation of rail-steel structure and properties of the surface layer |
|
|
Ivanov Y., Morozov K., Peregudov O., Gromov V.
|
| Volume 47, Nº 11 (2017) |
Dependence of the Frictional Coefficient on the Rheological Properties of the Lubricant in Pipe Pressing |
|
|
Kosmatskii Y.
|
| Volume 47, Nº 3 (2017) |
Describing the isothermal bainitic transformation in structural steels by a logistical function |
|
|
Yudin Y., Maisuradze M., Kuklina A.
|
| Volume 46, Nº 9 (2016) |
Design of new precision alloys |
|
|
Molotilov B., Galkin M., Kornienkov B.
|
| Volume 48, Nº 8 (2018) |
Desulfurization of Hot Metal by the Injection of High-Quality Lime Powder |
|
|
Manachin I., Shevchenko A.
|
| Volume 48, Nº 9 (2018) |
Determination of CO2 Emissions in Russia’s Steel-Industry: Methodological Issues |
|
|
Simonyan L.
|
| Volume 48, Nº 9 (2018) |
Determination of the Dynamic Viscosity of Liquid Alloys from the Phase Diagram |
|
|
Malyshev V., Makasheva A.
|
| Volume 46, Nº 12 (2016) |
Determining the carbon content in converter steel during oxygen injection |
|
|
Kurkin V., Vdovin K., Pekhterev S.
|
| Volume 47, Nº 5 (2017) |
Determining the chlorine content in the blast-furnace system |
|
|
Murav’eva I., Bebeshko G.
|
| 76 - 100 de 623 resultados |
<< < 1 2 3 4 5 6 7 8 9 10 > >> |
