| Edição |
Título |
Arquivo |
| Volume 49, Nº 4 (2019) |
Improving Cylindrical Inconel 718 Ingots Produced at PAO Ruspolimet |
|
|
Demchenko A., Korzun E., Chernyshov E.
|
| Volume 49, Nº 2 (2019) |
Improving Induction Crucible Furnaces |
|
|
Levshin G.
|
| Volume 49, Nº 2 (2019) |
Improving Metallurgical Information Systems: Blast-Furnace Applications |
|
|
Spirin N., Rybolovlev V., Lavrov V., Shnaider D., Krasnobaev A., Onorin O.
|
| Volume 48, Nº 1 (2018) |
Improving Pipe Production on the TPA 220 Piercing Mill |
|
|
Chernyshev Y., Bolotov A., Starogorodtsev V., Shamilov A., Chechulin Y.
|
| Volume 49, Nº 5 (2019) |
Improving the Deformation of Tube Billet in Continuous Roll Forming |
|
|
Novokshonov D., Sokolova O., Lepestov A.
|
| Volume 47, Nº 3 (2017) |
Improving the dummy bar in continuous slab-casting machines |
|
|
Shishkin V., Loza A., Rassokhin D.
|
| Volume 47, Nº 8 (2017) |
Improving the energy efficiency of blast furnaces at PAO NLMK |
|
|
Filatov S., Zagainov S., Gileva L., Kurunov I., Titov V.
|
| Volume 46, Nº 7 (2016) |
Improving the flexural rigidity of cold-finished steel |
|
|
Zaides S., Nguyen V.
|
| Volume 49, Nº 1 (2019) |
Improving the Gas-Exhaust System at Foundry Electrofurnaces |
|
|
Eron’ko S., Gorbatyuk S., Tkachev M., Oshovskaya E.
|
| Volume 49, Nº 6 (2019) |
Improving the Performance of the Annular Furnace at PAO ChTPZ |
|
|
Shchukina N., Cheremiskina N., Loshkarev N., Lavrov V.
|
| Volume 46, Nº 5 (2016) |
Improving the plasticity of thin cold-rolled steel sheet for cold stamping |
|
|
Doshchechkina I., D’yachenko S., Ponomarenko I., Tatarkina I.
|
| Volume 47, Nº 1 (2017) |
Improving the processing of steelmaking waste. Part 1. Thermodynamic analysis |
|
|
Dil’din A., Trofimov E., Chumanov I.
|
| Volume 47, Nº 3 (2017) |
Improving the processing of steelmaking waste. Part 2. Development of the basic processing system |
|
|
Dil’din A., Chumanov I., Trofimov E., Zherebtsov D.
|
| Volume 46, Nº 11 (2016) |
Improving the production of pipe steel |
|
|
Lopatenko A., Orekhov D., Semin A.
|
| Volume 46, Nº 7 (2016) |
Improving the production of steel grinding balls at AO EVRAZ ZSMK |
|
|
Stalinskii D., Rudyuk A., Solenyi V., Yudin A., Volkov K., Atkonova O.
|
| Volume 47, Nº 2 (2017) |
Improving the quality of steel grinding balls |
|
|
Stalinskii D., Rudyuk A., Solenyi V., Yudin A.
|
| Volume 46, Nº 1 (2016) |
Improving the roller shaping of large-diameter pipe from strip |
|
|
Il’ichev V., Zalavin Y.
|
| Volume 48, Nº 9 (2018) |
Improving the Sinter at PAO NLMK |
|
|
Bersenev I., Petryshev A., Kolyasnikov A., Milokhin E., Semenov O., Isaenko G.
|
| Volume 46, Nº 8 (2016) |
Indirect reduction in blast-furnace smelting |
|
|
Kurunov I., Filatov S., Tikhonov D., Basov V.
|
| Volume 48, Nº 2 (2018) |
Influence of a Rotary Electromagnetic Field and Mechanical Stimulation on the Production of Cobalt Nanopowder by Reduction with Hydrogen |
|
|
Nguyen V., Konyukhov Y., Ryzhonkov D.
|
| Volume 47, Nº 11 (2017) |
Influence of Alloying and Heat Treatment on the Abrasive and Impact–Abrasive Wear Resistance of High-Manganese Steel |
|
|
Vdovin K., Feoktistov N., Gorlenko D., Chernov V., Khrenov I.
|
| Volume 49, Nº 2 (2019) |
Influence of B2O3 and Basicity of CaO–SiO2–B2O3–Al2O3 Slag on the Saturation Concentration of Magnesium Oxide |
|
|
Babenko A., Smetannikov A., Zhuchkov V., Upolovnikova A.
|
| Volume 49, Nº 11 (2019) |
Influence of Boron Modifications and Cooling Conditions during the Structural and Phase State Solidification of Heat- and Wear-Resistant White Cast Iron |
|
|
Kolokol’tsev V., Petrochenko E., Molochkova O.
|
| Volume 49, Nº 1 (2019) |
Influence of Casting Technology on the Properties of Cast Steel Billet |
|
|
Chernyshov E., Baev I., Romanov A., Romanova E.
|
| Volume 46, Nº 3 (2016) |
Influence of chemically active elements on the hydrogen cracking of pipe steel |
|
|
Golubtsov V., Ryabchikov I., Mizin V.
|
| 226 - 250 de 623 resultados |
<< < 5 6 7 8 9 10 11 12 13 14 > >> |
