| Edição |
Título |
Arquivo |
| Volume 49, Nº 11 (2019) |
A Growth Kinetics Study and Simulation for Recrystallized Ferrite Grains under the Annealing of Automotive Steel Cold-Rolled Sheets |
|
|
Vasilyev A., Sokolov S., Zhitelev P., Sokolov D., Kolbasnikov N.
|
| Volume 46, Nº 1 (2016) |
A new generation of economical automotive steel |
|
|
Rodionova I., Uglov V., Zaitsev A., Protasov A., Mishnev P., Adigamov R., Pavlov S., Las’kov S., Nikolaev O., Kiryushin A., Tikhonov A., Ryabchikov V.
|
| Volume 48, Nº 10 (2018) |
Acoustic Assessment of the Internal Stress and Mechanical Properties of Differentially Hardened Rail |
|
|
Murav’ev V., Volkova L., Platunov A., Gushchina L.
|
| Volume 47, Nº 5 (2017) |
Activity of Ti and V in iron melts |
|
|
Ser’eznov V., Lysenkova E., Stomakhin A.
|
| Volume 46, Nº 10 (2016) |
Adaptive control of the ignition of sintering batch |
|
|
Endiyarov S.
|
| Volume 48, Nº 1 (2018) |
Adjusting the Load Graph by Coordinating Major Power Consumers |
|
|
Shurygin Y.
|
| Volume 46, Nº 5 (2016) |
Advantages of stoppers with MgO-based heads in continuous casting machines |
|
|
Korostelev A., S’emshchikov N., Chernyshev A., Semin A., Bel’maz K., Bozheskov A., Kazakov V., Kosonogov A.
|
| Volume 48, Nº 9 (2018) |
Alloy Production from High-Silica Manganese Ore and High-Ash Kazakhstan Coal |
|
|
Mukhambetgaliev E., Esenzhulov A., Roshchin V.
|
| Volume 46, Nº 10 (2016) |
Analysis of the properties and functions of metal components |
|
|
Rubin G., Chukin M., Gun G., Polyakova M.
|
| Volume 46, Nº 2 (2016) |
Analysis of the static pressure difference of blast-furnace gases on the basis of the Clapeyron–Mendeleev equation |
|
|
Lyalyuk V.
|
| Volume 47, Nº 8 (2017) |
Application of the triad of blast furnace, oxygen converter, and electric arc furnace for reducing of carbon footprint |
|
|
Lisienko V., Chesnokov Y., Lapteva A.
|
| Volume 49, Nº 3 (2019) |
Assessing the Gas Permeability of the Cohesive Zone in the Blast Furnace |
|
|
Kuzin A., Khlaponin N.
|
| Volume 49, Nº 7 (2019) |
Assessing the Size of Phase Inclusions in Ferrochrome Alloys by Means of Ultrasound Resonance |
|
|
Berestov A., Kudryavtsev E., Martynenko S., Rod’ko I.
|
| Volume 48, Nº 10 (2018) |
Assessment of Nonuniform Batch Distribution in Blast Furnace |
|
|
Sibagatullin S., Kharchenko A., Devyatchenko L.
|
| Volume 47, Nº 9 (2017) |
Assessment of steel deformability in terms of energy dissipation |
|
|
Gliner R., Dubinskii V., Katyukhin E., Pryanichnikov V.
|
| Volume 49, Nº 6 (2019) |
Assessment of the Load on Automatic Pipe-Rolling Systems and Prospects for New Systems |
|
|
Chechulin Y., Belyaev S., Kuznetsov V., Morgunov V., Vert V.
|
| Volume 47, Nº 4 (2017) |
Asymmetric three-roller sheet-bending systems in steel-pipe production |
|
|
Shinkin V.
|
| Volume 48, Nº 8 (2018) |
Automatic Control of Electrostimulated Drawing |
|
|
Kuznetsov V., Kuznetsova E., Gromov V., Kosinov D.
|
| Volume 48, Nº 1 (2018) |
Behavior of Conducting Liquid within an Arc Furnace in a Vertical Magnetic Field |
|
|
Yachikov I., Portnova I., Larina T.
|
| Volume 49, Nº 4 (2019) |
Behavior of Fine Pearlite Plates in the Deformation of High-Carbon Steel |
|
|
Koptseva N., Efimova Y., Gulin A., Narasimyan K., Prasad M.
|
| Volume 48, Nº 5 (2018) |
Behavior of Structural Defects of Already-Deformed Continuous-Cast Bar on Rolling |
|
|
Smirnov E., Sklyar V., Smirnov O., Belevitin V., Pivovarov R.
|
| Volume 48, Nº 10 (2018) |
Benefits and Risks of High-Intensity Blast-Furnace Operation |
|
|
Zagainov S., Filatov S., Myasoedov S., Gileva L., Titov V.
|
| Volume 46, Nº 3 (2016) |
Benefits of helical final gas-cooling systems for coke-oven gas |
|
|
Bazhenov O.
|
| Volume 47, Nº 11 (2017) |
Blast Furnace Shaft Thermal State Monitoring System |
|
|
Semenov Y., Shumelchik E., Horupakha V.
|
| Volume 46, Nº 11 (2016) |
Blast-furnace dynamics and the static pressure losses |
|
|
Korshikov G.
|
| 1 - 25 de 623 resultados |
1 2 3 4 5 6 7 8 9 10 > >> |
