Production of Capillary Pipe for Single-Use Medical Syringes
- Autores: Yur’ev B.1, Dudko V.1, Selyanin G.1
-
Afiliações:
- Yeltsin Ural Federal University
- Edição: Volume 49, Nº 3 (2019)
- Páginas: 198-202
- Seção: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180496
- DOI: https://doi.org/10.3103/S096709121903015X
- ID: 180496
Citar
Resumo
Production technology is developed for capillary pipe used in disposable medical syringes. The heat treatment of the pipe in pure hydrogen with inert-gas injection is described. In industrial research, the annealing of the capillary pipe in an electrical furnace is optimized. The temperature field within the muffle furnace is analyzed. The optimal flow rate of protective gas and the limiting permissible flow rate of the injected gas (nitrogen and argon) are determined. The mechanical properties of the pipes (blanks) welded at Tyumen Medical-Supply Plant and manufactured at Pervouralsk New Pipe Plant (PNTZ) are studied. When using nitrogen as the protective gas instead of hydrogen, the likelihood of obtaining clean pipe surfaces is greatly increased.
Sobre autores
B. Yur’ev
Yeltsin Ural Federal University
Email: v.a.dudko@urfu.ru
Rússia, Yekaterinburg
V. Dudko
Yeltsin Ural Federal University
Autor responsável pela correspondência
Email: v.a.dudko@urfu.ru
Rússia, Yekaterinburg
G. Selyanin
Yeltsin Ural Federal University
Email: v.a.dudko@urfu.ru
Rússia, Yekaterinburg