| 期 |
标题 |
文件 |
| 卷 49, 编号 4 (2019) |
Stabilizing the Stress State of Wire in Drawing under Countertension with Variable Frictional Coefficient |
(Eng)
|
|
Gur’yanov G., Kalugina O.
|
| 卷 49, 编号 4 (2019) |
Kinematics of Metallurgical Cutters with Parallel Blades |
(Eng)
|
|
Bychkov I., Dvornikov L., Zhukov I.
|
| 卷 49, 编号 4 (2019) |
Creep Resistance of Ferrite–Martensite Steel for Nuclear Reactors |
(Eng)
|
|
Belomyttsev M., Molyarov V.
|
| 卷 49, 编号 4 (2019) |
Improving Cylindrical Inconel 718 Ingots Produced at PAO Ruspolimet |
(Eng)
|
|
Demchenko A., Korzun E., Chernyshov E.
|
| 卷 49, 编号 4 (2019) |
Decreasing the Heat Losses at the Air Tuyeres in Blast Furnaces |
(Eng)
|
|
Radyuk A., Titlyanov A., Tarasov Y., Sidorova T.
|
| 卷 49, 编号 4 (2019) |
Cohen’s Class Time-Frequency Distributions for Measurement Signals as a Means of Monitoring Technological Processes |
(Eng)
|
|
Fedosenkov D., Simikova A., Kulakov S., Fedosenkov B.
|
| 卷 49, 编号 4 (2019) |
Electromagnetic Stirring in Continuous-Casting Machines |
(Eng)
|
|
Shakhov S., Vdovin K.
|
| 卷 49, 编号 4 (2019) |
Improved Electrical Control of Ladle–Furnace Units by Means of Arc-Current Harmonics |
(Eng)
|
|
Nikolaev A., Luk’yanov S., Tulupov P.
|
| 卷 49, 编号 4 (2019) |
Production of Heavy Plates of Pipe Steel with Increased Strength and Cold Resistance on the 5000 Rolling Mill at PJSC MMK |
(Eng)
|
|
Denisov S., Stekanov P., Poletskov P., Gushchina M., Nikitenko O.
|
| 卷 49, 编号 4 (2019) |
Drawing of Thin-Walled Welded Pipe |
(Eng)
|
|
Myshechkin A., Osadchii V.
|
| 卷 49, 编号 4 (2019) |
Influence of Vanadium on Carbide Deposition in the Working Layer of ICDP Iron Rollers |
(Eng)
|
|
Vdovin K., Koptseva N., Gorlenko D., Feoktistov N., Kuryaev D.
|
| 卷 49, 编号 4 (2019) |
Behavior of Fine Pearlite Plates in the Deformation of High-Carbon Steel |
(Eng)
|
|
Koptseva N., Efimova Y., Gulin A., Narasimyan K., Prasad M.
|
| 卷 49, 编号 3 (2019) |
Decomposition of Supercooled Austenite in Low-Carbon Pipe Steel |
(Eng)
|
|
Poletskov P., Denisov S., Nikitenko O., Chukin D., Gushchina M.
|
| 卷 49, 编号 3 (2019) |
Thermal Stability of Ni3Al-Based Composite with Honeycomb Structure |
(Eng)
|
|
Belomyttsev M., Phung Tuan Anh .
|
| 卷 49, 编号 3 (2019) |
High-Temperature Melt Treatment in the Production of Heat-Resistant Alloys with a High Content of Foundry Wastes |
(Eng)
|
|
Shmakova K., Tyagunov A., Baryshev E., Tyagunov G., Kostina T.
|
| 卷 49, 编号 3 (2019) |
Reduction of Tungsten from Its Oxide in Surfacing by Means of Powder-Core Wire |
(Eng)
|
|
Kozyrev N., Kryukov R., Shurupov V., Kibko N., Bashchenko L.
|
| 卷 49, 编号 3 (2019) |
Convective Heat Transfer in Jet Interaction with a Boundary Surface |
(Eng)
|
|
Pribytkov I., Kondrashenko S.
|
| 卷 49, 编号 3 (2019) |
Creation of a Wear-Resistant Tungsten-Carbide Surface Layer on Carbon Steels by Implantation and Electromechanical Machining |
(Eng)
|
|
Gorlenko A., Davydov S., Shevtsov M., Boldyrev D.
|
| 卷 49, 编号 3 (2019) |
Assessing the Gas Permeability of the Cohesive Zone in the Blast Furnace |
(Eng)
|
|
Kuzin A., Khlaponin N.
|
| 卷 49, 编号 3 (2019) |
Decision-Making Support in Blast-Furnace Operation |
(Eng)
|
|
Pavlov A., Polinov A., Spirin N., Onorin O., Lavrov V., Gurin I.
|
| 卷 49, 编号 3 (2019) |
Modification of High-Manganese Steel Castings with Titanium Carbonitride |
(Eng)
|
|
Vdovin K., Feoktistov N., Gorlenko D., Nikitenko O., Khamidulina D.
|
| 卷 49, 编号 3 (2019) |
Steel Production from Metal-Bearing Waste |
(Eng)
|
|
Tleugabulov S., Nurumgaliev A., Koishina G., Aitkenov N.
|
| 卷 49, 编号 3 (2019) |
Influence of Nonmetallic Inclusions on the Failure of Cast Stainless Steels |
(Eng)
|
|
Fomicheva N., Markova E.
|
| 卷 49, 编号 3 (2019) |
Visualizing the Fine Structure of Surface Bainite Layers on the Basis of EBSD Data |
(Eng)
|
|
Yudin Y., Kuklina A., Maisuradze M., Karabanalov M.
|
| 卷 49, 编号 3 (2019) |
Production of Capillary Pipe for Single-Use Medical Syringes |
(Eng)
|
|
Yur’ev B., Dudko V., Selyanin G.
|
| 101 - 125 的 621 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 > >>
|
