| Шығарылым |
Атауы |
Файл |
| Том 46, № 4 (2016) |
Connecting-rod dynamics of the primary drive in a cold-rolling mill |
(Eng)
|
|
Rakhmanov S.
|
| Том 46, № 3 (2016) |
High-temperature corrosion of heat-resistant chromonickel steel |
(Eng)
|
|
Ivanov D., Kozhukhov A., Urazova L.
|
| Том 46, № 3 (2016) |
Damage to thick steel sheet in cyclic plastic flexure |
(Eng)
|
|
Maksimov A., Gulyaev M., Erokhina I.
|
| Том 46, № 3 (2016) |
Sleeve deformation in a three-roller screw-rolling mill |
(Eng)
|
|
Kharitonov E., Romanenko V., Budnikov A.
|
| Том 46, № 3 (2016) |
Failure of metallurgical sinter |
(Eng)
|
|
Ryabchikov M., Grebennikova V., Ryabchikova E., Bogdanov N.
|
| Том 46, № 3 (2016) |
Shaping of pipe blanks on specialized bending equipment |
(Eng)
|
|
Samusev S., Zhigulev G., Fadeev V., Manakhov K.
|
| Том 46, № 3 (2016) |
Determining the wear and abrasive properties of foundry coke |
(Eng)
|
|
Vdovin K., Ivanova V.
|
| Том 46, № 3 (2016) |
Decomposition kinetics of supercooled austenite in porous powder steel |
(Eng)
|
|
Ivashko A., Tsyganova M., Nabatov R.
|
| Том 46, № 3 (2016) |
Benefits of helical final gas-cooling systems for coke-oven gas |
(Eng)
|
|
Bazhenov O.
|
| Том 46, № 3 (2016) |
Production of mineral binder from steel-smelting slag |
(Eng)
|
|
Mikheenkov M., Sheshukov O., Nekrasov I., Egiazar’yan D., Lobanov D.
|
| Том 46, № 3 (2016) |
Influence of deformation and heat treatment on the hardness of cold-rolled ПХ23Ю5 steel pipe |
(Eng)
|
|
Skachkov O., Trofimenko N., Pozharov S., Dyatlenko V.
|
| Том 46, № 3 (2016) |
Local heat treatment of weld seams in moderate-diameter pipe produced by high-frequency current |
(Eng)
|
|
Tkachuk M., Bagmet O., Stepanov P.
|
| Том 46, № 3 (2016) |
Influence of chemically active elements on the hydrogen cracking of pipe steel |
(Eng)
|
|
Golubtsov V., Ryabchikov I., Mizin V.
|
| Том 46, № 3 (2016) |
Production of hexahedral pipe blanks from centrifugally cast 04Х14ТЗР1Ф (СЧ82) steel billet for the nuclear industry |
(Eng)
|
|
Nikitin K., Osadchii V., Kolikov A., Saf’yanov A., Lyakh A., Eremin V.
|
| Том 46, № 3 (2016) |
Influence of magnetite and its enrichment on the characteristics of unfluxed roasted pellets |
(Eng)
|
|
Zhuravlev F., Lyalyuk V., Chuprinov E., Kassim D., Lyakhova I.
|
| Том 46, № 2 (2016) |
Influence of hydrogen on the localization of plastic strain in low-carbon steel during electrolytic saturation |
(Eng)
|
|
Barannikova S., Ivanov Y., Kosinov D., Konovalov S., Gromov V.
|
| Том 46, № 2 (2016) |
Formation of ultrafine-grain structure in carbon steel by high-temperature high-speed compression |
(Eng)
|
|
Koptseva N., Efimova Y., Nikitenko O., Baryshnikov M., Zherebtsov M.
|
| Том 46, № 2 (2016) |
Influence of uniaxial extension of C01Mn2Si1 steel samples after heat treatment on the structural noise |
(Eng)
|
|
Muraviev V., Lenkov S., Dedov A., Baiteryakov A., Kotolomov A.
|
| Том 46, № 2 (2016) |
Formation of silicon carbide from microsilica waste by means of lignite semicoke |
(Eng)
|
|
Anikin A., Galevskii G., Rudneva V.
|
| Том 46, № 2 (2016) |
Steady heat transfer in melt-irrigated blast-furnace zone |
(Eng)
|
|
Yaroshenko Y., Shvydkii V., Spirin N., Lavrov V.
|
| Том 46, № 2 (2016) |
Simulation of slab formation in a continuous-casting machine |
(Eng)
|
|
Fedosov A.
|
| Том 46, № 2 (2016) |
Thermodynamic analysis of carbide-layer formation in steel with microarc saturation by molybdenum |
(Eng)
|
|
Stepanov M., Dombrovskii Y.
|
| Том 46, № 2 (2016) |
Influence of nonmetallic inclusions in rail steel on the high-temperature plasticity |
(Eng)
|
|
Simachev A., Oskolkova T., Temlyantsev M.
|
| Том 46, № 2 (2016) |
Dual control in the last stage of oxygen injection in the converter |
(Eng)
|
|
Myshlyaev L., Ageev D., Chernyavskii S.
|
| Том 46, № 2 (2016) |
Reconstruction of gas-purification system and ladle–furnace unit at PAO Severstal’ |
(Eng)
|
|
Stalinskii D., Mantula V., Pirogov A., Shaparenko A., Shvets M.
|
| Нәтижелер 621 - 576/600 |
<< < 19 20 21 22 23 24 25 > >>
|
