Production of Motor Fuel from Lignocellulose in a Three-Stage Process (Review and Experimental Article)

详细

A three-stage process for the production of motor fuel (MT) components from lignocellulosic raw materials is described. In the first, pretreatment stage, lignocellulose is subjected to hydrolysis with cellulases followed by fermentation of the resulting sugars into ethanol; then, dilute ethanol solutions are concentrated by membrane vapor separation to obtain 70–80% solutions. At the third stage, aqueous ethanol solutions (water content 0–50%) in the presence of a Pd–Zn/Al₂O₃/MFI catalyst at 350°C and a space velocity of 0.6 h⁻¹ are converted into alkanes, and С₃–С₈ olefins and С₆–C₁₂ aromatic compounds (MT components). It has been found that water in an amount of up to 30% in ethanol solutions effectively inhibits the detrimental hydrocarbon cracking and catalyst coking processes, thereby leading to a decrease in the formation of undesirable C₁ and C₂ products and an increase in the catalyst on-stream time to 100 h wherein the yield of the desired fraction is reduced only by 10–15%. The subsequent treatment of the catalyst surface with steam and hydrogen completely restores its catalytic activity.