Dealumination of MOR Zeolites with Different Crystal Morphologies

Аннотация

The process of dealumination of mordenites differing in morphology and crystal size obtained under identical conditions from reaction mixtures of similar composition has been studied. Parameters that have been chosen to change the morphology and crystal size are the dry matter concentration in the reaction mixture, the pH of the reaction mixture, the crystallization time, the presence of crystalline seeds, and agitation during the synthesis. Dealumination has been performed by heat treatment at 700°C followed by acid treatment. It has been shown that the stability of the mordenite crystal framework to dealumination depends on the thickness of the primary needle crystal, which forms the basis of large zeolite crystals, not on the size of the zeolite crystal as a whole. With a decrease in the average needle crystal thickness from 250 to 90 nm, the Si/Al molar ratio in the crystal lattice, determined from ²⁹Si NMR data, increases from 6.8 to 9.5. The dealumination is accompanied by a change in the texture of large mordenite crystals associated with a decrease in the packing density of the primary needles.