The Effect of Errors of the Form and Position of the Base Surfaces of a Composite Axisymmetric Body on the Size of an Adjacent Contour
- Authors: Yamnikov A.S.1, Rodionova E.N1,2, Yamnikova O.A.2, Matveev I.A.2
-
Affiliations:
- Tula State University
- SPLAV Scientific and Production Association
- Issue: Vol 62, No 8 (2019)
- Pages: 692-696
- Section: Linear and Angular Measurements
- URL: https://journals.rcsi.science/0543-1972/article/view/246764
- DOI: https://doi.org/10.1007/s11018-019-01680-4
- ID: 246764
Cite item
Abstract
The influence of errors of form (ovalities) of the base surfaces of a composite axisymmetric body on the size of an adjacent contour was studied. It was proved that ovalities of all bourrelets of a composite axisymmetric body do not render an effect on the accuracy of measurement of the size of entry of this case, although they do affect the entrysize. Errors of the placement of joined tubes of the composite axisymmetric body in the form of displacements or misalignments of axes cause measurement errors of the entry size of the casings that are proportional to the ratio of the distances from the basic prisms to the end faces of tubes vs. the length of the tubes.
About the authors
A. S. Yamnikov
Tula State University
Author for correspondence.
Email: Yamnikovas@mail.ru
Russian Federation, Tula
E. N Rodionova
Tula State University; SPLAV Scientific and Production Association
Email: Yamnikovas@mail.ru
Russian Federation, Tula; Tula
O. A. Yamnikova
SPLAV Scientific and Production Association
Email: Yamnikovas@mail.ru
Russian Federation, Tula
I. A. Matveev
SPLAV Scientific and Production Association
Email: Yamnikovas@mail.ru
Russian Federation, Tula