Email this article Determination of the True Temperature During Selective Laser Melting of Metal Powders Based on Measurements with an Infrared Camera
- Authors: Smurov I.Y.1,2, Dubenskaya M.A.1,2, Zhirnov I.V.1,2, Teleshevskii V.I.2
-
Affiliations:
- LTDS Laboratory, Saint-Etienne National Engineering School, University of Lyon
- STANKIN Moscow State Technological University
- Issue: Vol 59, No 9 (2016)
- Pages: 971-974
- Section: Article
- URL: https://journals.rcsi.science/0543-1972/article/view/245512
- DOI: https://doi.org/10.1007/s11018-016-1077-z
- ID: 245512
Cite item
Open Access
Access granted
Subscription Access
Abstract
The recovery of the true temperature of a metal powder during selective laser melting is examined. A method is proposed for determining the temperature of the surface of the melt bath of a metal powder during selective laser melting based on measurements with an infrared camera. The influence of key melt parameters on the geometry of the melt bath is estimated.
About the authors
I. Yu. Smurov
LTDS Laboratory, Saint-Etienne National Engineering School, University of Lyon; STANKIN Moscow State Technological University
Email: i.zhirnov@stankin.ru
France, Saint-Etienne; Moscow
M. A. Dubenskaya
LTDS Laboratory, Saint-Etienne National Engineering School, University of Lyon; STANKIN Moscow State Technological University
Email: i.zhirnov@stankin.ru
France, Saint-Etienne; Moscow
I. V. Zhirnov
LTDS Laboratory, Saint-Etienne National Engineering School, University of Lyon; STANKIN Moscow State Technological University
Author for correspondence.
Email: i.zhirnov@stankin.ru
France, Saint-Etienne; Moscow
V. I. Teleshevskii
STANKIN Moscow State Technological University
Email: i.zhirnov@stankin.ru
Russian Federation, Moscow
Supplementary files
