Enviar artigo por via de e-mail Impact of Conditions of Methyl Methacrylate Suspension Polymerization on the Particle Size Distribution of the Polymer
- Autores: Ladilova N.1, Kulikova G.1, Kornienko P.1, Shirshin K.2,3, Shirshin K.2
-
Afiliações:
- Kargin Polymer Chemistry and Technology Research Institute
- Nizhny Novgorod State Technical University named after R.E. Alekseev
- LLC “HOMA Group”
- Edição: Nº 4 (2023)
- Páginas: 358-362
- Seção: Articles
- URL: https://journals.rcsi.science/0044-4618/article/view/247291
- DOI: https://doi.org/10.31857/S0044461823040059
- EDN: https://elibrary.ru/OFGYVK
- ID: 247291
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The impact of operational conditions for carrying out methyl methacrylate suspension polymerization during stabilization of the system with dispersants of different chemical natures: poly-2-acrylamido-2-methylpropanesulfonic acid and Mg(OH)2, was studied. The role of the contribution of the chemical nature of the dispersant, which reduces the interfacial tension between the monomer and aqueous phases, to the particle size distribution of the polymer particles is shown. When polymerizing methyl methacrylate in the presence of water-insoluble Mg(OH)2, the interfacial tension diminishes, which brings about the formation of a highly dispersed polymer without the use of high-speed dispersion of the reaction mass.
Sobre autores
N. Ladilova
Kargin Polymer Chemistry and Technology Research Institute
Email: acjournal.nauka.nw@yandex.ru
606000, Dzerzhinsk, Russia
G. Kulikova
Kargin Polymer Chemistry and Technology Research Institute
Email: acjournal.nauka.nw@yandex.ru
606000, Dzerzhinsk, Russia
P. Kornienko
Kargin Polymer Chemistry and Technology Research Institute
Email: acjournal.nauka.nw@yandex.ru
606000, Dzerzhinsk, Russia
K. Shirshin
Nizhny Novgorod State Technical University named after R.E. Alekseev; LLC “HOMA Group”
Email: acjournal.nauka.nw@yandex.ru
603155, Nizhny Novgorod, Russia; 606000, Dzerzhinsk, Russia
K. Shirshin
Nizhny Novgorod State Technical University named after R.E. Alekseev
Autor responsável pela correspondência
Email: acjournal.nauka.nw@yandex.ru
603155, Nizhny Novgorod, Russia
Bibliografia
- Холодова А. А., Куликова Г. Л., Клюжин Е. С., Беспалова О. В. Синтез и исследование свойств суспензионного полиметилметакрилата для герметизирующих композиций // Клеи, герметики, технологии. 2014. № 9. С. 22-26. https://www.elibrary.ru/smytub
- Gonçalves O., Nogueira A., Araujo P., Machado R. Effects of operational parameters on particle size distributions in methyl methacrylate suspension polymerization // Ind. Eng. Chem. Res. 2011. V. 21. N 50. P. 9116-9122. https://doi.org/10.1021/ie200230j
- Пат. РФ 2007144517 (опубл. 2009). Способ получения полимеров суспензионной полимеризацией со средними размерами частиц от 1 до 40 мкм, а также формовочные массы и формованные изделия, содержащие полимер, полученный суспензионной полимеризацией.
- Jahanzad F., Sajjadi S., Shahriar S., Brooks W.Comparative study of particle size in suspension polymerization and corresponding monomer - water dispersion // Ind. Eng. Chem. Res. 2005. V. 44. N 11. P. 4112-4119. https://doi.org/10.1021/ie048827f
- Брагинский Л. Н. Перемешивание в жидких средах. Физические основы и инженерные методы расчета. Л.: Химия, 1984. С. 204-206. Ладилова Н. Ю.
