Simulating Production of Nanofibers by Solution Blow Spinning

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

Theoretical and experimental studies of the technology of blown spinning of nanofibers from a polyacrylonitrile solution for the production of nonwovens are presented. Numerical simulation of air spray flows in the coaxial nozzle and their interaction with a polymer solution is given. A model is developed to further optimize the parameters and scale the production of nanofiber materials. The mathematical model allows determining the distribution of air flow rate throughout the workspace that affects the diameter and structure of the fibers and visualizing the process of transformation of a drop of polymer solution into a thin thread, providing insights into the stages of fiber formation. The experimental studies produced nanofibers with an average diameter of 237 nm.

Авторлар туралы

A. Abramov

D. I. Mendeleev Russian University of Chemical Technology

Moscow, Russian Federation

D. Kunaev

D. I. Mendeleev Russian University of Chemical Technology

Email: kunaev.d.a@mucrt.ru
Moscow, Russian Federation

N. Menshutina

D. I. Mendeleev Russian University of Chemical Technology

Moscow, Russian Federation

Әдебиет тізімі

  1. Колмаков А., Баринов С., Алымов М. Основы технологий и применение наноматериалов. Litres, 2022.
  2. Макарчук Г.В., Лазарева Т.П., Прохоров А.Г., Коляда Д.А. Вода и здоровье. Наноматериалы в процессах очистки воды // Актуальные проблемы военно-научных исследований. 2020. № S5. С. 189.
  3. Меньшутина Н.В. Введение в нанотехнологию. Изд-во науч. лит. Бочкаревой НФ, 2006.
  4. Самосудов Д.А. Анализ применения наноматериалов в электронике: достижения и перспективы развития // Актуальные вопросы современной науки и практики. 2023. С. 97.
  5. Wang Y., Liu A., Han Y., Li T. Sensors based on conductive polymers and their composites: a review //Polymer International. 2020. V. 69. № 1. P. 7.
  6. Осовская И.И., Горбачев С.А. Полимеры в биотехнологии и биоинженерии // учебное пособие СПб.: ВШТЭ СПГУПТД, 2019.
  7. Chen Y., Amiri A., Boyd J.G., Naraghi M. Promising trade-offs between energy storage and load bearing in carbon nanofibers as structural energy storage devices // Advanced Functional Materials. 2019. V. 29. № 33. P. 1901425.
  8. Yang J., Mao Z., Zheng R., Liu H., Shi L. Solution-blown aligned nanofiber yarn and its application in yarn-shaped supercapacitor // Materials. 2020. V. 13. № 17. P. 3778.
  9. Zhang W., Song C., Li Q., Chen Y., Li W., He C. Polymer Blend Blow Spinning of Flexible Porous Carbon Nanofibers Capable for Multiapplication //ACS Applied Nano Materials. 2024. V. 7. № 15. P. 17719.
  10. Hui Z., Zhang L., Ren G., Sun G., Yu H.D., Huang W. Green flexible electronics: natural materials, fabrication, and applications //Advanced Materials. 2023. V. 35. № 28. P. 2211202.
  11. Mobaraki M., Liu M., Masoud A.R., Mills D.K. Biomedical applications of blow-spun coatings, mats, and scaffolds – a mini-review //Journal of Composites Science. 2023. V. 7. № 2. P. 86.
  12. Farhaj S., Conway B.R., Ghori M.U. Nanofibres in drug delivery applications // Fibers. 2023. V. 11. № 2. P. 21.
  13. Song J., Li Z., Wu H. Blowspinning: a new choice for nanofibers // ACS applied materials & interfaces. 2020. Vol. 12. № 30. P. 33447.
  14. de Castro Monsores K. G., da Silva A. O., Oliveira S. D. S. A., Weber R. P., Dias M. L. Production of nanofibers from solution blow spinning (SBS) // Journal of Materials Research and Technology. 2022. V. 16. P. 1824.
  15. Atif R., Khalig J., Combrinck M., Hassanin A.H., Shehata N., Elnabawy E., Shyha I. Solution blow spinning of polyvinylidene fluoride-based fibers for energy harvesting applications: A review // Polymers. 2020. V. 12. № 6. P. 1304.
  16. Souza R.J., Soares Filho J.E., Simões T.A., Oliveira J.E., Medeiros E.S. So Experimental Investigation of Solution Blow Spinning Nozzle Geometry and Processing Parameters on Fiber Morphology // ACS Applied Polymer Materials. 2024.
  17. Daristotle J.L., Behrens A.M., Sandler A.D., Kofinas P. A review of the fundamental principles and applications of solution blow spinning // ACS applied materials & interfaces. 2016. V. 8. № 51. P. 34951.
  18. Sun G., Wang Y., Zhang Y., Han W., Shang S. Formation Mechanism of Fibrous Web in the Solution Blowing Process // ACS omega. 2022. V. 7. № 24. P. 20584.
  19. Pereira C.C.A.B. et al. Computational modeling and simulation of gas turbulence phenomena in solution blow spinning process for ceramic nanofibers // International Journal of Advances in Engineering & Technology. 2023. Vol. 16. P. 129.
  20. Liu F. et al. Development of coaxial double blow solution blow spinning technique for preparation of superfine fibers and its application in air filtration // Textile Research Journal. 2025. C. 834.
  21. Zheng W. et al. Theoretical and experimental studies on the fabrication of cylindrical-electrode-assisted solution blowing spinning nanofibers // e-Polymers. 2021. T. 21. № 1. C. 411.
  22. Zhang W., He J., Li J., Jin X., Li Q., He C., Li W. Large-scale solution blow spinning of flexible carbon nanofibers for the separation applications // Separation and Purification Technology. 2024. V. 329. P. 125199.

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу

© Russian Academy of Sciences, 2025

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).