Properties of the Coatings Fabricated by Plasma-Jet Hard-Facing by Dispersed Mechanical Engineering Wastes

R. A. Latypov; E. V. Ageev; G. R. Latypova; A. Yu. Altukhov; E. V. Ageeva

doi:10.1134/S0036029518060137

Properties of the Coatings Fabricated by Plasma-Jet Hard-Facing by Dispersed Mechanical Engineering Wastes

作者: Latypov R.¹, Ageev E.², Latypova G.¹, Altukhov A.², Ageeva E.²
隶属关系:
1. Moscow Polytechnic University
2. Southwest State University
期: 卷 2018, 编号 6 (2018)
页面: 573-575
栏目: Hardening and Coating Technologies
URL: https://journals.rcsi.science/0036-0295/article/view/172592
DOI: https://doi.org/10.1134/S0036029518060137
ID: 172592

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
统计

详细

The properties of the coatings fabricated by plasma-jet hard-facing with a powder mixture of the dispersed wastes of VK8 hard alloy, R6M5 high-speed steel, and Kh15N60 nichrome taken in the same proportions are studied. The microhardness and the wear resistance of coatings are higher than those of the 30KhGSA steel substrate by a factor of 1.4 and 1.3, respectively. The coatings have a very small number of pores, and the arithmetical mean deviation of the coating profile is Ra = 0.73.