Thermodynamic simulation and an experimental study of the possibility of synthesizing hardened Cu–Zr–O alloys
- 作者: Samoilova O.1, Mikhailov G.1, Trofimov E.1, Makrovets L.1
-
隶属关系:
- South Ural State University (National Research University)
- 期: 卷 2016, 编号 9 (2016)
- 页面: 864-868
- 栏目: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/170873
- DOI: https://doi.org/10.1134/S0036029516090135
- ID: 170873
如何引用文章
详细
The conditions of formation of hardened Cu–Zr–O alloys are determined theoretically and experimentally. Thermodynamic analysis of the possibility of formation of zirconium oxide in a liquid metal is performed by constructing the surface of component solubility in a metal melt. Disperse zirconium oxide inclusions in samples are detected by scanning electron microscopy and electron-probe microanalysis. The hardness and the electrical conductivity of experimental samples are measured in the as-cast state and after cold deformation. Hardness HV 133 is reached in cold-deformed samples containing 0.05 wt % Zr without heat treatment. The results obtained can be used to create a process for the formation of bulk composite materials based on copper and copper alloys.
作者简介
O. Samoilova
South Ural State University (National Research University)
编辑信件的主要联系方式.
Email: samoylova_o@mail.ru
俄罗斯联邦, Chelyabinsk, Zlatoust, 454080
G. Mikhailov
South Ural State University (National Research University)
Email: samoylova_o@mail.ru
俄罗斯联邦, Chelyabinsk, Zlatoust, 454080
E. Trofimov
South Ural State University (National Research University)
Email: samoylova_o@mail.ru
俄罗斯联邦, Chelyabinsk, Zlatoust, 454080
L. Makrovets
South Ural State University (National Research University)
Email: samoylova_o@mail.ru
俄罗斯联邦, Chelyabinsk, Zlatoust, 454080