Modifying ability of titanium-based pelleted master alloys


Цитировать

Полный текст

Открытый доступ Открытый доступ
Доступ закрыт Доступ предоставлен
Доступ закрыт Только для подписчиков

Аннотация

The problem of enhancing the quality of pressed titanium master alloys is discussed to increase the rate and degree of dissolution of their components and to ensure the formation of a fine-grained structure in aluminum alloys. A technology of producing a pelleted titanium master alloy for effective correction of the chemical composition of an aluminum alloy in casting is developed and tested. Incoming inspection of the component composition and the flux distribution in the volume of pressed pellets of various manufacturers is performed. The rate of dissolution of pressed powder master alloys in the aluminum melt is studied, and their modifying ability is estimated after studying the microstructures of cast blanks. Molasses is used as a binder in a pelleted master alloy. As a result, we achieved a uniform flux distribution over the pellet volume and the formation of uniform pores after annealing as compared pelleted master alloys of other manufacturers. The fabricated alloying briquettes have higher strength characteristics and their dissolution rate in the aluminum melt is higher than those of analogs by 15–20%.

Об авторах

V. Bazhin

Saint-Petersburg State Mining University

Автор, ответственный за переписку.
Email: bazhin-alfoil@mail.ru
Россия, Vasil’evskii Ostrov, 21 Liniya 2, St. Petersburg, 199106

S. Savchenkov

Saint-Petersburg State Mining University

Email: bazhin-alfoil@mail.ru
Россия, Vasil’evskii Ostrov, 21 Liniya 2, St. Petersburg, 199106

Ya. Kosov

Saint-Petersburg State Mining University

Email: bazhin-alfoil@mail.ru
Россия, Vasil’evskii Ostrov, 21 Liniya 2, St. Petersburg, 199106


© Pleiades Publishing, Ltd., 2017

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах