Amorphous-Alloy-Based Composites Prepared by High-Pressure Torsion
- Autores: Permyakova I.1, Blinova E.1, Shchetinin I.2, Savchenko E.2
-
Afiliações:
- Bardin Central Research Institute of Ferrous Metallurgy
- National University of Science and Technology MISiS
- Edição: Volume 2019, Nº 10 (2019)
- Páginas: 994-1001
- Seção: Advanced Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/173555
- DOI: https://doi.org/10.1134/S0036029519100203
- ID: 173555
Citar
Resumo
Abstract—Deformation-induced composites consisting of alternating layers of amorphous Fe–Ni–B and Co–Fe–Cr–Si–B alloys are prepared by consolidation via high-pressure torsion in a Bridgman chamber. The sequence of changing structural states of the composites and their individual components upon severe plastic deformation and variations of the Vickers hardness and magnetic characteristics are studied in accordance with the degree of deformation. It is found that the use of high-pressure torsion at a high strain efficiently favors the transition of the materials from an amorphous into a nanocrystalline state, increases their microhardness, and retains soft magnetic properties.
Sobre autores
I. Permyakova
Bardin Central Research Institute of Ferrous Metallurgy
Autor responsável pela correspondência
Email: inga_perm@mail.ru
Rússia, Moscow, 105005
E. Blinova
Bardin Central Research Institute of Ferrous Metallurgy
Email: inga_perm@mail.ru
Rússia, Moscow, 105005
I. Shchetinin
National University of Science and Technology MISiS
Email: inga_perm@mail.ru
Rússia, Moscow, 119049
E. Savchenko
National University of Science and Technology MISiS
Email: inga_perm@mail.ru
Rússia, Moscow, 119049
![](/img/style/loading.gif)