Microstructure and Mechanical Properties of the Fuel Cladding in VVER-1000 after the Thermal Tests That Model Dry Storage Conditions
- Autores: Kobylyansky G.1, Obukhov A.1, Mazaev A.1, Zvir E.1, Ilyin P.1, Markelov D.1
-
Afiliações:
- JSC “SSC RIAR”
- Edição: Volume 2019, Nº 4 (2019)
- Páginas: 421-426
- Seção: Applied Problems of Strength and Plasticity
- URL: https://journals.rcsi.science/0036-0295/article/view/173197
- DOI: https://doi.org/10.1134/S0036029519040190
- ID: 173197
Citar
Resumo
The mechanical properties, the dislocation structure, and the morphology of phase precipitates in the E110 alloy fuel claddings worked in the fuel assemblies of a VVER-1000 reactor to a fuel burn-out of 20 and 70 (MW day)/kgU are studied. The influence of the thermal conditions that model the fuel element dry storage conditions on the annealing of radiation defects and the recovery of the mechanical properties of the claddings is analyzed.
Sobre autores
G. Kobylyansky
JSC “SSC RIAR”
Autor responsável pela correspondência
Email: gpk@niiar.ru
Rússia, Dimitrovgrad, 433510
A. Obukhov
JSC “SSC RIAR”
Email: gpk@niiar.ru
Rússia, Dimitrovgrad, 433510
A. Mazaev
JSC “SSC RIAR”
Email: gpk@niiar.ru
Rússia, Dimitrovgrad, 433510
E. Zvir
JSC “SSC RIAR”
Email: gpk@niiar.ru
Rússia, Dimitrovgrad, 433510
P. Ilyin
JSC “SSC RIAR”
Email: gpk@niiar.ru
Rússia, Dimitrovgrad, 433510
D. Markelov
JSC “SSC RIAR”
Email: gpk@niiar.ru
Rússia, Dimitrovgrad, 433510