Embrittlement of an Orthorhombic Ti2AlNb-Based Titanium Alloy in a Hydrogenated State
- Autores: Senkevich K.1, Umarova O.1, Zasypkin V.1
-
Afiliações:
- Moscow Aviation Institute (National Research University)
- Edição: Volume 2019, Nº 1 (2019)
- Páginas: 31-35
- Seção: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/172862
- DOI: https://doi.org/10.1134/S0036029519010130
- ID: 172862
Citar
Resumo
A rapidly quenched intermetallic VTI-4 titanium alloy, which is based on the orthorhombic Ti2AlNb phase and is formed by extraction from a molten hanging drop, has been hydrogenated. The phase composition and the microhardness of the alloy saturated to various hydrogen contents are studied. To study the opportunities of producing a fine alloy powder, fibers are ground in a ball mill. The alloy in the rapidly quenched β single-phase state is found to exhibit a high plasticity and is not fragmented upon ball milling, and sharp fiber embrittlement is observed as the alloy is saturated to a high hydrogen content (0.88 wt %). In this hydrogenated state, the alloy has a high hardness and its phase composition consists of the hydrogen-rich Ti2AlNb phase.
Sobre autores
K. Senkevich
Moscow Aviation Institute (National Research University)
Autor responsável pela correspondência
Email: senkevichks@yandex.ru
Rússia, Moscow, 125993
O. Umarova
Moscow Aviation Institute (National Research University)
Email: senkevichks@yandex.ru
Rússia, Moscow, 125993
V. Zasypkin
Moscow Aviation Institute (National Research University)
Email: senkevichks@yandex.ru
Rússia, Moscow, 125993