Microstructure of the Joint of 1565chM Alloy Sheets Fabricated by Friction Stir Welding
- Autores: Ovchinnikov V.1, Badall N.1
-
Afiliações:
- Moscow Polytechnic University
- Edição: Volume 2018, Nº 6 (2018)
- Páginas: 552-556
- Seção: Special Electrometallurgy
- URL: https://journals.rcsi.science/0036-0295/article/view/172576
- DOI: https://doi.org/10.1134/S0036029518060162
- ID: 172576
Citar
Resumo
The microstructure in the joints of a non-heat-treatable aluminum–magnesium 1565chM alloy sheets fabricated by friction stir welding is studied. The structure near the interface between the base metal and a welded joint is examined. Friction stir welding results in a gradient structure with ultrafine grains at the center of the welded joint. The structure in the welded joint forms by the mechanism resulting in the formation of a layered ultrafine structure due to plastic deformation by shear and rotation of structural fragments. Layers are assumed to form due to the balance between the strain hardening and the softening caused by frictional heating and heat released during deformation. An analogy between the microstructure in the joint fabricated by friction stir welding and the microstructure formed by sliding friction is drawn.
Palavras-chave
Sobre autores
V. Ovchinnikov
Moscow Polytechnic University
Autor responsável pela correspondência
Email: vikov1956@mail.ru
Rússia, Moscow
N. Badall
Moscow Polytechnic University
Email: vikov1956@mail.ru
Rússia, Moscow