Optimization of the Technological Synthesis of Refractory Compounds
- Autores: Gaidar S.1, Karelina M.2, Prikhod’ko V.3, Volkov A.1
-
Afiliações:
- Russian State Agrarian University (Timiryazev MSKhA)
- Moscow Automobile and Road Construction State Technical University (MADI)
- Russian University of Transport (MIIT)
- Edição: Volume 2017, Nº 13 (2017)
- Páginas: 1096-1098
- Seção: Powder Metallurgy Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/171914
- DOI: https://doi.org/10.1134/S0036029517130079
- ID: 171914
Citar
Resumo
The results of experimental studies, which are related to the regulation of the fractional composition of refractory compounds by roll milling in using controlled roll opening and unbalanced peripheral speeds of rollers, are reported. The content of prepared fine, middle, and coarse fractions is within 50–80%; in this case, the milling time of synthesis products is less than the time of ball milling by an order of magnitude. The application of roll milling for refining the products of self-propagating high-temperature synthesis can be most efficient in using together with heat-generating reactor to solve the main problem of self-propagating synthesis (SHS), which is a problem for recent several decades (the problem is the creation of intense automated production of refractory compounds in using continuous manufacturing cycle within a energotechnological system with the recovery of a great quantity of heat released during SHS).
Sobre autores
S. Gaidar
Russian State Agrarian University (Timiryazev MSKhA)
Autor responsável pela correspondência
Email: avtokon93@yandex.ru
Rússia, Moscow
M. Karelina
Moscow Automobile and Road Construction State Technical University (MADI)
Email: avtokon93@yandex.ru
Rússia, Moscow
V. Prikhod’ko
Russian University of Transport (MIIT)
Email: avtokon93@yandex.ru
Rússia, Moscow
A. Volkov
Russian State Agrarian University (Timiryazev MSKhA)
Email: avtokon93@yandex.ru
Rússia, Moscow