Resistance of the Contact Welding Electrodes Made of a Cu–0.7% Cr–0.9% Hf Alloy with an Ultrafine-Grained Structure
- Авторлар: Shan’gina D.1,2, Ivanov N.3, Bochvar N.1, Dobatkin S.1,2
-
Мекемелер:
- Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
- Laboratory of Hybrid Nanostructured Materials, National University of Science and Technology MISiS
- Southwest State University
- Шығарылым: Том 2018, № 9 (2018)
- Беттер: 815-819
- Бөлім: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/172115
- DOI: https://doi.org/10.1134/S0036029518090112
- ID: 172115
Дәйексөз келтіру
Аннотация
The structure, the mechanical properties, and the electrical conductivity of the Cu–0.7% Cr–0.9% Hf alloy subjected to equal-channel angular pressing (ECAP) followed by aging are studied. The treatment that consists of ECAP and aging at 450°C for 2.5 h is shown to result in a high strength (σu = 605 MPa) and a high electrical conductivity (78% IACS) of the alloy. This combination of properties increases the resistance of the contact welding electrodes made of an ultrafine-grained Cu–0.7% Cr–0.9% Hf alloy as compared to its initial coarse-grained state.
Авторлар туралы
D. Shan’gina
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; Laboratory of Hybrid Nanostructured Materials, National University of Science and Technology MISiS
Хат алмасуға жауапты Автор.
Email: shanginadaria@mail.ru
Ресей, Moscow; Moscow
N. Ivanov
Southwest State University
Email: shanginadaria@mail.ru
Ресей, Kursk
N. Bochvar
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: shanginadaria@mail.ru
Ресей, Moscow
S. Dobatkin
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; Laboratory of Hybrid Nanostructured Materials, National University of Science and Technology MISiS
Email: shanginadaria@mail.ru
Ресей, Moscow; Moscow