TRIP effect in austenitic–martensitic VNS9-Sh steel at various strain rates
- Авторлар: Terent’ev V.1, Slizov A.2, Prosvirnin D.1
-
Мекемелер:
- Baikov Institute of Metallurgy and Materials Science
- OAO Kamov
- Шығарылым: Том 2016, № 10 (2016)
- Беттер: 946-950
- Бөлім: Promising Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/170932
- DOI: https://doi.org/10.1134/S0036029516100220
- ID: 170932
Дәйексөз келтіру
Аннотация
The mechanical properties of austenitic–martensitic VNS9-Sh (23Kh15N5AM3-Sh) steel are studied at a static strain rate from 4.1 × 10–5 to 17 × 10–3 s–1 (0.05–20 mm/min). It is found that, as the strain rate increases, the ultimate tensile strength decreases and the physical yield strength remains unchanged (≈1400 MPa). As the strain rate increases, the yield plateau remains almost unchanged and the relative elongation decreases continuously. Because of high microplastic deformation, the conventional yield strength is lower than the physical yield strength over the entire strain rate range under study. The influence of the TRIP effect on the changes in the mechanical properties of VNS9-Sh steel at various strain rates is discussed.
Авторлар туралы
V. Terent’ev
Baikov Institute of Metallurgy and Materials Science
Хат алмасуға жауапты Автор.
Email: fatig@mail.ru
Ресей, Leninskii pr. 49, Moscow, 119991
A. Slizov
OAO Kamov
Email: fatig@mail.ru
Ресей, Lyubertsy, Moscow oblast, 140007
D. Prosvirnin
Baikov Institute of Metallurgy and Materials Science
Email: fatig@mail.ru
Ресей, Leninskii pr. 49, Moscow, 119991
![](/img/style/loading.gif)