Increasing the Energy Efficiency of the Cyclic Action Mechanisms in Rolling for a Roller Bed Used as an Example
- Authors: andreev A.N.1, Kolesnichenko D.A.1
-
Affiliations:
- Vologda State University
- Issue: Vol 2017, No 12 (2017)
- Pages: 1025-1032
- Section: Simulation of Metallurgical Processes
- URL: https://journals.rcsi.science/0036-0295/article/view/171883
- DOI: https://doi.org/10.1134/S0036029517120035
- ID: 171883
Cite item
Abstract
The possibility of increasing the energy efficiency of the production cycle in a roller bed is briefly reviewed and justified. The sequence diagram of operation of the electrical drive in a roller bed is analyzed, and the possible increase in the energy efficiency is calculated. A method for energy saving is described for the application of a frequency-controlled asynchronous electrical drive of drive rollers in a roller bed with an increased capacitor capacity in a dc link. A fine mathematical model is developed to describe the behavior of the electrical drive during the deceleration of a roller bed. An experimental setup is created and computer simulation and physical modeling are performed. The basic information flows of the general hierarchical automatic control system of an enterprise are described and determined with allowance for the proposed method of increasing the energy efficiency.
About the authors
A. N. andreev
Vologda State University
Email: dimakolesnichenko@gmail.com
Russian Federation, Vologda
D. A. Kolesnichenko
Vologda State University
Author for correspondence.
Email: dimakolesnichenko@gmail.com
Russian Federation, Vologda