Application of elastically deformed test samples for measuring stresses using a hand-held X-ray diffractometer
- Authors: Shitkin S.L.1, Rozhnov A.B.2, Matveev D.B.3, Kotelkin A.V.1
-
Affiliations:
- Railway Research Institute
- National University of Science and Technology MISiS
- Research Institute of Standardization and Unification
- Issue: Vol 2016, No 10 (2016)
- Pages: 999-1003
- Section: Diagnostics and Mechanical Test Techniques
- URL: https://journals.rcsi.science/0036-0295/article/view/170968
- DOI: https://doi.org/10.1134/S0036029516100190
- ID: 170968
Cite item
Abstract
To test a mock-up of a hand-held X-ray diffractometer intended for determining the surface stresses in the important parts of rail transport, we propose to use control samples subjected to elastic deformation by three-point bending. The results obtained with hand-held and stationary X-ray diffractometers and the calculated stresses are compared. The stresses to be compared agree well within the limits of an acceptable error.
About the authors
S. L. Shitkin
Railway Research Institute
Email: rojnov@nm.ru
Russian Federation, Tret’ya Mytishchinskaya ul., Moscow, 129626
A. B. Rozhnov
National University of Science and Technology MISiS
Author for correspondence.
Email: rojnov@nm.ru
Russian Federation, Leninskii pr. 4, Moscow, 119049
D. B. Matveev
Research Institute of Standardization and Unification
Email: rojnov@nm.ru
Russian Federation, ul. Sokol’nicheskii Val 37/10, Moscow, 107113
A. V. Kotelkin
Railway Research Institute
Email: rojnov@nm.ru
Russian Federation, Tret’ya Mytishchinskaya ul., Moscow, 129626