Thermal stability of the cellular structure of an austenitic alloy after selective laser melting
- Authors: Bazaleeva K.O.1, Tsvetkova E.V.2, Balakirev E.V.3, Yadroitsev I.A.4, Smurov I.Y.5
-
Affiliations:
- Bauman Moscow State Technical University
- Bochvar High-Technology Scientific Research Institute for Inorganic Materials
- All-Russian Institute of Aviation Materials
- Department of Mechanical and Mechatronic Engineering
- University of Lyon
- Issue: Vol 2016, No 5 (2016)
- Pages: 424-430
- Section: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/170531
- DOI: https://doi.org/10.1134/S0036029516050062
- ID: 170531
Cite item
Abstract
The thermal stability of the cellular structure of an austenitic Fe–17% Cr–12% Ni–2% Mo–1% Mn–0.7% Si–0.02% C alloy produced by selective laser melting in the temperature range 20–1200°C is investigated. Metallographic analysis, transmission electron microscopy, and scanning electron microscopy show that structural changes in the alloy begin at 600-700°C and are fully completed at ~1150°C. Differential scanning calorimetry of the alloy with a cellular structure reveals three exothermic processes occurring upon annealing within the temperature ranges 450–650, 800–1000, and 1050–1200°C.
About the authors
K. O. Bazaleeva
Bauman Moscow State Technical University
Author for correspondence.
Email: bazaleevak@mail.ru
Russian Federation, Moscow, 105005
E. V. Tsvetkova
Bochvar High-Technology Scientific Research Institute for Inorganic Materials
Email: bazaleevak@mail.ru
Russian Federation, Moscow, 123098
E. V. Balakirev
All-Russian Institute of Aviation Materials
Email: bazaleevak@mail.ru
Russian Federation, Moscow, 105005
I. A. Yadroitsev
Department of Mechanical and Mechatronic Engineering
Email: bazaleevak@mail.ru
South Africa, Free State
I. Yu. Smurov
University of Lyon
Email: bazaleevak@mail.ru
France, Saint-Etienne