Issue |
Title |
File |
Vol 120, No 1 (2019) |
Influence of Modifying Nanoadditives on the Properties of a Multilayer Composite Coating Obtained by Laser Surfacing |
(Eng)
|
Cherepanov A.N., Orishich A.M., Ovcharenko V.E., Malikov A.G., Drozdov V.O., Pshenichnikov A.P.
|
Vol 119, No 13 (2018) |
Dynamic Properties of Submicrocrystalline Aluminum Alloys |
(Eng)
|
Brodova I.G., Petrova A.N.
|
Vol 119, No 13 (2018) |
Development of High-Strength, Fine, and Ultrafine-Grained Shape Memory Alloys |
(Eng)
|
Pushin V.G., Kuranova N.N., Pushin A.V.
|
Vol 119, No 13 (2018) |
Oxide-Dispersion Strengthened Radiation-Resistant Steels |
(Eng)
|
Sagaradze V.V., Kozlov K.A., Kataeva N.V.
|
Vol 119, No 12 (2018) |
Optimization of the Microstructure of Nb3Sn Layers in Superconducting Composites |
(Eng)
|
Popova E.N., Deryagina I.L.
|
Vol 119, No 12 (2018) |
Tribological Properties and Structure of Aluminum—Lithium Alloys |
(Eng)
|
Korshunov L.G., Kaigorodova L.I., Chernenko N.L., Rasposienko D.Y.
|
Vol 119, No 12 (2018) |
Structure Evolution of Intermetallic Alloy VTI-4 during Inert Gas Quenching |
(Eng)
|
Demakov S.L., Vodolazskii F.V., Kalienko M.S.
|
Vol 119, No 11 (2018) |
Strain Transfer across the Ferrite/Cementite Interface in Carbon Steels with Coarse Lamellar Pearlite |
(Eng)
|
Kar’kina L.E., Kabanova I.G., Kar’kin I.N.
|
Vol 119, No 11 (2018) |
On the Issue of the Improvement of Magnesium Plasticity by Cold Severe Plastic Deformation |
(Eng)
|
Komkova D.A., Antonova O.V., Volkov A.Y.
|
Vol 119, No 11 (2018) |
Mechanical Alloying of Ti–Fe Alloys Using Severe Plastic Deformation by High-Pressure Torsion |
(Eng)
|
Dobromyslov A.V., Taluts N.I.
|
Vol 119, No 10 (2018) |
Simulation of the Effect of Ultrasound on the Dislocation Structure of Deformed Polycrystals |
(Eng)
|
Murzaev R.T., Bachurin D.V., Nazarov A.A.
|
Vol 119, No 10 (2018) |
The Strength and Fracture Mechanism of Unalloyed Medium-Carbon Steel with Ultrafine-Grained Structure under Single Loads |
(Eng)
|
Klevtsov G.V., Valiev R.Z., Klevtsova N.A., Pigaleva I.N., Merson E.D., Linderov M.L., Ganeev A.V.
|
Vol 119, No 10 (2018) |
Resistance of Laser-Clad Chromium–Nickel Coatings to Failure under Contact Fatigue Loading |
(Eng)
|
Savrai R.A.
|
Vol 119, No 10 (2018) |
Deformation Behavior of a Copper Single Crystal upon Loading by Spherically Converging Shock Waves |
(Eng)
|
Dobromyslov A.V., Taluts N.I.
|
Vol 119, No 9 (2018) |
Microstructure Homogeneity and Mechanical Properties of Large-Size As-Cast High Nb Containing TiAl Alloy Ingot |
(Eng)
|
Xu M., Zhang C.J., Han J.C., Chen Y.F., Kong F.T., Chen Y.Y., Zhang S.Z.
|
Vol 119, No 9 (2018) |
Microstructure and Mechanical Properties of a Near-α-Titanium-Alloy/TiB Composite Prepared in situ by Casting and Subjected to Deformation and Heat Treatment |
(Eng)
|
Gaisin R.A., Imayev V.M., Imayev R.M.
|
Vol 119, No 9 (2018) |
Evolution of the Microstructure and Mechanical Properties of Copper during the Pressing–Drawing Process |
(Eng)
|
Volokitina I.E., Volokitin A.V.
|
Vol 119, No 8 (2018) |
Mechanisms of Cold Deformation under High Pressure of Superconductive MgB2 Ceramics |
(Eng)
|
Kuznetsova E.I., Krinitsina T.P., Sudareva S.V., Blinova Y.V., Degtyarev M.V., Akshentsev Y.N.
|
Vol 119, No 8 (2018) |
Evolution of Microstructure and Mechanical Properties of Composite Aluminum-Based Alloy during ECAP |
(Eng)
|
Lezhnev S.N., Volokitina I.E., Kuis D.V.
|
Vol 119, No 7 (2018) |
Effect of Aluminum on the Structural Transitions and the Wear Resistance of Hadfield Steel under Friction |
(Eng)
|
Korshunov L.G., Chernenko N.L.
|
Vol 119, No 7 (2018) |
Effect of Melt-In and Key-Hole Modes on the Structure and Mechanical Properties of AISI 430 Steel Welded Using Plasma Transfer Arc Welding |
(Eng)
|
Tanju Teker .
|
Vol 119, No 7 (2018) |
Microstructural Evolution of Iron Based Alloys Produced by Spark Plasma Sintering Method |
(Eng)
|
Muthuchamy A., Annamalai A.R., Karthikeyan M., Thakur A., Nagaraju N., Agrawal D.K.
|
Vol 119, No 7 (2018) |
Structure and Nanomechanical Properties of the Al–Si–Fe Alloy Produced by Blowing the Melt with Oxygen |
(Eng)
|
Chikova O.A., Finkel’shtein A.B., Shefer A.A.
|
Vol 119, No 7 (2018) |
Structure and Mechanical Properties of Steel Welding Joints Produced Using Abrasive Waterjet Cutting |
(Eng)
|
Tabatchikova T.I., Lepikhin S.V., Morozova A.N., Gudnev N.Z.
|
Vol 119, No 6 (2018) |
Growth in Vacancy Voids at the Initial Stage of Transient Swelling |
(Eng)
|
Portnykh I.A., Kozlov A.V.
|
51 - 75 of 179 Items |
<< < 1 2 3 4 5 6 7 8 > >>
|