期 |
标题 |
文件 |
卷 118, 编号 3 (2017) |
Experimental investigation of in-situ transformations of the M7C3 carbide in the cast Fe–Cr–Ni alloy |
 (Eng)
|
Kraposhin V., Kondrat’ev S., Talis A., Anastasiadi G.
|
卷 118, 编号 3 (2017) |
Crystallography of in-situ transformations of the M7C3 carbide in the cast Fe–Cr–Ni alloy |
 (Eng)
|
Kraposhin V., Kondrat’ev S., Talis A., Anastasiadi G.
|
卷 118, 编号 3 (2017) |
Energy of internal interfaces as a characteristic of the structural evolution of ultrafine-grained copper and nickel after annealing |
 (Eng)
|
Kuznetsov P., Rakhmatulina T., Belyaeva I., Korznikov A.
|
卷 118, 编号 3 (2017) |
Investigation of the intermetallic β'(B2)-phase in the Co–Al–Si system |
 (Eng)
|
Kazantseva N., Ezhov I., Davydov D., Vinogradova N., Terent’ev P.
|
卷 118, 编号 3 (2017) |
Evolution of the nickel structure during deformation by shear under high pressure at 150°C |
 (Eng)
|
Degtyarev M., Voronova L., Chashchukhina T., Pilyugin V., Resnina N.
|
卷 118, 编号 3 (2017) |
Thermal-expansion anisotropy of orthorhombic martensite in the two-phase (α + β) titanium alloy |
 (Eng)
|
Demakov S., Stepanov S., Illarionov A., Ryzhkov M.
|
卷 118, 编号 3 (2017) |
Effect of heating temperature on the formation of structure and phase composition of a biocompatible alloy Ti–6Al–4V–ELI subjected to equal-channel angular pressing |
 (Eng)
|
Illarionov A., Shchetnikov N., Illarionova S., Popov A.
|
卷 118, 编号 3 (2017) |
Effect of the quasi-continuous equal-channel angular pressing on the structure and functional properties of Ti–Ni-based shape-memory alloys |
 (Eng)
|
Khmelevskaya I., Karelin R., Prokoshkin S., Andreev V., Yusupov V., Perkas M., Prosvirnin V., Shelest A., Komarov V.
|
卷 118, 编号 2 (2017) |
Effect of ion irradiation on the nanocrystallization and magnetic properties of soft magnetic Fe72.5Cu1Nb2Mo1.5Si14B9 alloy |
 (Eng)
|
Ovchinnikov V., Makhin’ko F., Gushchina N., Stepanov A., Medvedev A., Starodubtsev Y., Kataev V., Tsepelev V., Belozerov V.
|
卷 118, 编号 2 (2017) |
Structure of vacuum Cu–Ta condensates |
 (Eng)
|
Zubkov A., Zubarev E., Sobol’ O., Hlushchenko M., Lutsenko E.
|
卷 118, 编号 2 (2017) |
Influence of electrodeposition parameters on structural and morphological features of Ni nanotubes |
 (Eng)
|
Kozlovskiy A., Shlimas D., Shumskaya A., Kaniukov E., Zdorovets M., Kadyrzhanov K.
|
卷 118, 编号 2 (2017) |
The evolution of structural and phase states of titanium aluminides after γ irradiation in small doses |
 (Eng)
|
Loginova M., Yakovlev V., Sitnikov A., Sobachkin A., Ivanov S., Negodyaev A., Gradoboev A.
|
卷 118, 编号 2 (2017) |
Effect of γ-(Fe,Ni) crystal-size stabilization in Fe–Ni–B amorphous ribbon |
 (Eng)
|
Gorshenkov M., Glezer A., Korchuganova O., Aleev A., Shurygina N.
|
卷 118, 编号 2 (2017) |
Hydrogen in the Ti3Al intermetallic compound: Study by the NMR method |
 (Eng)
|
Soloninin A., Skripov A., Buzlukov A., Aleksashin B., Medvedev E.
|
卷 118, 编号 1 (2017) |
Simulation of hydrogen diffusion in TiHx structures |
 (Eng)
|
Rokhmanenkov A., Kuksin A., Yanilkin A.
|
卷 118, 编号 1 (2017) |
Structure and properties of cast and splat-quenched high-entropy Al–Cu–Fe–Ni–Si alloys |
 (Eng)
|
Bashev V., Kushnerov O.
|
卷 118, 编号 1 (2017) |
Microstructure of the β-phase in the Sn11Sb5.5Cu babbit |
 (Eng)
|
Valeeva A., Valeev I., Fazlyakhmetov R.
|
卷 118, 编号 1 (2017) |
Structural and phase transformations and micromechanical properties of the high-nitrogen austenitic steel deformed by shear under pressure |
 (Eng)
|
Makarov A., Luchko S., Shabashov V., Volkova E., Osintseva A., Zamatovskii A., Litvinov A., Sagaradze V.
|
卷 117, 编号 12 (2016) |
Deformation-intensified atomic separation in bcc Fe–Mn alloys |
 (Eng)
|
Shabashov V., Kozlov K., Lyashkov K., Zamatovskii A., Titova S.
|
卷 117, 编号 12 (2016) |
Wave formation during explosive welding: the relaxation of a nonequilibrium structure |
 (Eng)
|
Greenberg B., Ivanov M., Kuz’min S., Lysak V., Pushkin M., Inozemtsev A., Patselov A., Pasheev A.
|
卷 117, 编号 12 (2016) |
Calculations of the influence of alloying elements (Al, Cr, Mn, Ni, Si) on the Solubility of carbonitrides in low-carbon low-alloy steels |
 (Eng)
|
Gorbachev I., Popov V., Pasynkov A.
|
卷 117, 编号 12 (2016) |
Influence of megaplastic deformation on the structure and hardness of Al–Cu–Mg alloy after aging |
 (Eng)
|
Petrova A., Radziszewska H., Kaczmarek L., Klih M., Brodova I., Steglinski M.
|
卷 117, 编号 12 (2016) |
Structure and nanomechanical characteristics of Al–Cu–Mg–Si alloy with partly liquated grain boundaries upon heat treatment |
 (Eng)
|
Chikova O., Reznik P., Ovsyannikov B.
|
卷 117, 编号 12 (2016) |
Structural and phase transformations, mechanical properties, and shape-memory effects in quasibinary Ni50Ti38Hf12 alloy obtained by quenching from the melt |
 (Eng)
|
Pushin V., Kuranova N., Pushin A., Uksusnikov A., Kourov N., Kuntsevich T.
|
卷 117, 编号 12 (2016) |
Thermoelastic martensitic transformations, mechanical properties, and shape-memory effects in rapidly quenched Ni45Ti32Hf18Cu5 alloy in the ultrafine-grained state |
 (Eng)
|
Pushin V., Pushin A., Kuranova N., Kuntsevich T., Uksusnikov A., Dyakina V., Kourov N.
|
201 - 225 的 287 信息 |
<< < 4 5 6 7 8 9 10 11 12 > >>
|