On Compression of a Heavy Compressible Layer of an Elastoplastic or Elastoviscoplastic Medium
- Авторы: Kovtanyuk L.V.1, Panchenko G.L.2,3
- 
							Учреждения: 
							- Institute for Automation and Control Processes of the Far East Branch of the Russian Academy of Sciences
- Institute ofMachinery and Metallurgy of the Far East Branch of the Russian Academy of Sciences
- Vladivostok State University of Economics and Service
 
- Выпуск: Том 52, № 6 (2017)
- Страницы: 653-662
- Раздел: Article
- URL: https://journals.rcsi.science/0025-6544/article/view/163133
- DOI: https://doi.org/10.3103/S002565441706005X
- ID: 163133
Цитировать
Аннотация
The problem of deformation of a horizontal plane layer of a compressible material is solved in the framework of the theory of small strains. The upper boundary of the layer is under the action of shear and compressing loads, and the no-slip condition is satisfied on the lower boundary of the layer. The loads increase in absolute value with time, then become constant, and then decrease to zero.Various plasticity conditions are consideredwith regard to the material compressibility, namely, the Coulomb–Mohr plasticity condition, the von Mises–Schleicher plasticity condition, and the same conditions with the viscous properties of the material taken into account. To solve the system of partial differential equations for the components of irreversible strains, a finite-difference scheme is developed for a spatial domain increasing with time. The laws of motion of elastoplastic boundaries are presented, the stresses, strains, rates of strain, and displacements are calculated, and the residual stresses and strains are found.
Ключевые слова
Об авторах
L. Kovtanyuk
Institute for Automation and Control Processes of the Far East Branch of the Russian Academy of Sciences
														Email: panchenko.21@yandex.ru
				                					                																			                												                	Россия, 							ul. Radio 5, Vladivostok, 690041						
G. Panchenko
Institute ofMachinery and Metallurgy of the Far East Branch of the Russian Academy of Sciences; Vladivostok State University of Economics and Service
							Автор, ответственный за переписку.
							Email: panchenko.21@yandex.ru
				                					                																			                												                	Россия, 							ul. Metallurgov 1, Komsomolsk-on-Amur, 681005; ul. Gogolya 41, Vladivostok, 690014						
Дополнительные файлы
 
				
			 
						 
					 
						 
						 
						 
									 
  
  
  
  
  Отправить статью по E-mail
			Отправить статью по E-mail  Открытый доступ
		                                Открытый доступ Доступ предоставлен
						Доступ предоставлен Только для подписчиков
		                                		                                        Только для подписчиков
		                                					