Free-surface roughness of thin-walled tubes in reduction


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The problem of the stress-strain state of thin-walled tubes in axisymmetric steady-state deformation is solved using the membrane theory of shells and the model of an ideal rigid-plastic material satisfying the Mises yield condition and the associated flow law. The obtained solution is used together with the empirical relation between the strain state at an arbitrary point of the free surface and the surface roughness parameters at the same point to determine the influence of some tube reduction parameters on the surface roughness parameters in the product. The employed empirical relation is derived assuming that the free surface roughness parameters depend on two independent kinematic variables.

Sobre autores

K. Manabe

University of Tokyo

Email: sergei_alexandrov@spartak.ru
Japão, Tokyo, 192-0397

S. Alexandrov

Ishlinsky Institute of Problems of Mechanics

Autor responsável pela correspondência
Email: sergei_alexandrov@spartak.ru
Rússia, Moscow, 119526

E. Lyamina

Ishlinsky Institute of Problems of Mechanics

Email: sergei_alexandrov@spartak.ru
Rússia, Moscow, 119526

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2017