Creating a Coating from a Titanium–Aluminum Intermetallic Compound By the Cold Spray Technology

S. P. Kiselev; N. S. Ryashin; E. A. Maksimovskii; V. P. Kiselev; S. V. Klinkov; V. F. Kosarev; A. A. Filippov; V. S. Shikalov

doi:10.1134/S0021894418060196

Creating a Coating from a Titanium–Aluminum Intermetallic Compound By the Cold Spray Technology

Autores: Kiselev S.P.¹^,2, Ryashin N.S.¹, Maksimovskii E.A.³, Kiselev V.P.¹, Klinkov S.V.¹, Kosarev V.F.¹, Filippov A.A.¹, Shikalov V.S.¹
Afiliações:
1. Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
2. Novosibirsk State Technical University
3. Nikolaev Institute of Inorganic Chemistry, Siberian Branch
Edição: Volume 59, Nº 6 (2018)
Páginas: 1126-1135
Seção: Article
URL: https://journals.rcsi.science/0021-8944/article/view/161446
DOI: https://doi.org/10.1134/S0021894418060196
ID: 161446

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

Results of experimental and numerical investigations of the process of creating coatings from a titanium–aluminum intermetallic compound by using an additive method are presented. It is demonstrated that the process of intermetallic compound formation is limited by the rate of titanium dissolution and diffusion in the aluminum melt. The proposed method can be applied for hardening titanium plate surfaces for their exploitation at high temperatures and pressures.